Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)
-   -   Question on speed Dial plan between Voxalot member. (https://forum.sipbroker.com/showthread.php?t=2283)

klap282799 09-17-2007 05:00 AM

Question on speed Dial plan between Voxalot member.
 
I want to route calls to a specific server (au.voxalot.com) and I wanted to setup a dial plan for it so I don't have to keep pressing *010 or *061

So I set a pattern match for : _XXXXXX
Replacement : *061${EXTEN}
Provider : Voxalot

The results are below when I dial 6 digits when playing around with "Test Dial" :
When I dial 282803, the string that gets sent is sip:*061282803@voxalot.com (Which routes to US, I can hear the delay)
When I dial *061282803, the string that gets sent is sip:*282803@au.voxalot.com. (Australia, little delay)
Even is I dial *010282803, the string that gets sent is sip:*282803@au.voxalot.com. (Australia, little delay)

The dial plan seems to bypass it's ability to detect the closest geographical location.

I can definitely hear the delay in the call that's routed to US instead of Australia.

Can someone help to see whether there's something I can tune in the dial plan? Or Martin, is this something that can be fixed?

Thanks.

emoci 09-17-2007 04:04 PM

I am no expert on this, but from my understanding:

If you call me, even though you may want to force a call to MyNumber@au.voxalot.com, because I am using the VoXalot US cluster, the call will be placed to MyNumber@us.voxalot.com (so from my understanding the cluster used, depends on the cluster in which the person you are calling is registered)....


Martin can probably step in with a more correct explanation....

martin 09-17-2007 09:58 PM

Quote:

Originally Posted by emoci (Post 12719)
I am no expert on this, but from my understanding:

If you call me, even though you may want to force a call to MyNumber@au.voxalot.com, because I am using the VoXalot US cluster, the call will be placed to MyNumber@us.voxalot.com (so from my understanding the cluster used, depends on the cluster in which the person you are calling is registered)....


Martin can probably step in with a more correct explanation....

Correct, however as long as both parties are handling NAT and Voxalot is not proxying the RTP the voice will be P2P.
.


All times are GMT. The time now is 04:37 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.