Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)
-   -   New Improvements (https://forum.sipbroker.com/showthread.php?t=102)

melbournelees 04-24-2006 10:46 AM

Quote:

Originally Posted by wildbill
Tried that as soon as it was available - no difference - also followed mallycats wiki as well - Bill

Can you show us that particular dial plan?

wildbill 04-24-2006 10:48 AM

This is my voxalot dial plan
1 _xxxxxxxx 617${EXTEN} sipme - for local Qld
2 _1777xxxxxx ${EXTEN} sipme - inter sipme
3 _0[2348]xxxxxxxx 61${EXTEN:1} sipme - for australia calls
for the above 3 in Enum replace - ${EXTEN}

The test button shows the correct number being redirected or Enum lookup but nothing happens on PSTN onforwarding - Bill

melbournelees 04-24-2006 10:56 AM

Quote:

Originally Posted by wildbill
This is my voxalot dial plan
1 _xxxxxxxx 617${EXTEN} sipme - for local Qld
2 _1777xxxxxx ${EXTEN} sipme - inter sipme
3 _0[2348]xxxxxxxx 61${EXTEN:1} sipme - for australia calls
for the above 3 in Enum replace - ${EXTEN}

The test button shows the correct number being redirected or Enum lookup but nothing happens on PSTN onforwarding - Bill

Try changing just 3 to:

Pattern: _0[23478]xxxxxxxx (note the addition of 7 for 07)
Replacement: ${EXTEN}
Provider: Sipme
ENUM Replacement: 61${EXTEN:1}

Then dial your PSTN number using the area code 07 prefix. We'll work out the rest later.

wildbill 04-24-2006 09:57 PM

Lee mods done and tried - all I get when I ring a PSTN number is "invalid call state" - Bill
This is from SPA page
Call 1 State: Invalid Call 2 State: Idle
Call 1 Tone: Reorder Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Outbound Call 2 Type:
Call 1 Remote Hold: No Call 2 Remote Hold:
Call 1 Callback: No Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: 0740xxxxxx@gw3 (Voxalot)

melbournelees 04-24-2006 11:29 PM

Hi Bill,

Can you try this number from your phone?
1-516-687-5089

wildbill 04-25-2006 01:43 AM

Have rung that plenty of times it is marks telling you if Enum or PSTN - if I use Voxalot via gw3 its Enum - use Sipme its PSTN - Bill
Sorry for the late reply been into the march and now inclined to kill a few of the enemy (disguised as schooners of beer) in the name of my father and his mates

melbournelees 04-25-2006 01:59 AM

Quote:

Originally Posted by wildbill
Have rung that plenty of times it is marks telling you if Enum or PSTN - if I use Voxalot via gw3 its Enum - use Sipme its PSTN - Bill

So we can safely assume calling other enum numbers work.
Would you like to pm your enum registered pstn number for me to test?

wildbill 04-25-2006 02:48 AM

Lee - Number sent - bill

melbournelees 04-25-2006 03:37 AM

Hey Bill,

I just thought of this. Could be your Sipme details with VoXaLot are not correct.

Lee.

wildbill 04-25-2006 04:19 AM

Martin/Lee - been on the phone to Lee and he suggested I remove all reference to Sipme in my SPA configuration and use the Voxalot provider/dial plan advanced page setup only for this - done this and it appears as if that everything is working OK now - however the real test will come when my wife uses the setup - thanks Bill


All times are GMT. The time now is 07:40 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.