Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)
-   -   Registered to Voxalot, but no echo test possible (https://forum.sipbroker.com/showthread.php?t=1199)

MET 03-10-2007 08:54 PM

Registered to Voxalot, but no echo test possible
 
While trying to get Voxalot working, I also tried to do an echo test by dialing 600 or *600. The client contacts Voxalot but I can't here my echo. What might have gone wrong here?

Ron 03-10-2007 11:07 PM

Audio problems are often the result of router or firewall issues. Try temporarily bypassing any router or firewall that you are using to see if the problem goes away.

Ron

MET 03-11-2007 08:09 AM

That shouldn't be the problem. Behind my router is an ATA and three softphones on the computer, all do work without voice problems. Voxalot runs on the Zoiper SIP/IAX-client http://www.zoiper.com/ With this same client I can do echo test using Asteriskguru, but not when using Voxalot.

MET 03-11-2007 11:34 AM

Tried it now by using X-Lite 2.0 but here the same problem: the client registers, dialing *600 connects to eu.voxalot.com but no echo.

eric23 03-11-2007 05:08 PM

I can't dial the echo test *600 or voicemail *500

*600 and *500 give me "The SIP code you have dialled is not correct, please try again"
*031600, *031500, *010600 and *010500 all give me "The number you have called could not be connected"

I have tried setting up a speed dial in VoXalot - **2 routes to sip:500@eu.voxalot.com but also gives me "The number you have called could not be connected"

I am receiving voicemail messages through to my email inbox just fine.

When I dial into my local SIP-Broker PSTN access number and dial *031500, it puts me through to the voicemail system. Last night my logon credentials didn't work. However, I've just checked now, and it all works fine!

So what could be the problems with the *500 and *600 codes?

kingfisher1111 03-11-2007 08:09 PM

Same problem here.. Am able to do with softclient Zoiper but not with voxalot...
Surprisingly no one is guiding us...

Ron 03-11-2007 09:37 PM

For those getting "The number you have called could not be connected", this sounds like a Dial Plan problem. You do NOT need a Dial Plan entry to handle internal numbers such as *500/*600. Try disabling any/all Dial Plan entries and see if *500/*600 works.

Ron

martin 03-11-2007 09:50 PM

Hi guys,

As Ron points out you do NOT need to handle * prefixed numbers in your dial plans. In fact, it is strongly recommended that you don't

If you are still having problems, PM me your 6 digit account and we will take a look.

eric23 03-12-2007 01:24 AM

martin, I have PM'ed you. Thank you.

thegradas 03-12-2007 02:57 AM

Mar. 11, 2007 @ 10:45 pm ET
Voxalot is not working for outbound calls through VoipDiscount... Using VoipDiscount directly, it works.
Tried eu.voxalot.com and us.voxalot.com


All times are GMT. The time now is 11:05 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.