Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)
-   -   New Improvements (https://forum.sipbroker.com/showthread.php?t=102)

martin 04-20-2006 11:34 AM

New Improvements
Today we released the following VoXaLot improvements:

- Added a new phone book feature to the Web Call-Back

- Added an optional "Delay" field to the Web Call-Back. This allows members to initiate a delayed web call. This useful is for dial-up users as it allows them to disconnect their internet connection to accept the inbound web call.

- Improved ENUM lookups and the dial plan "Test" functionality to also include ENUM lookups.

- Added an active flag to dial plan entries and providers

Please report any issues in this thread.

alfredwesterveld 04-20-2006 05:29 PM

You guys at voxalot.com come upgrade your system all the time. Awesome :D

wildbill 04-20-2006 09:50 PM

A test on the "Test" button on 2 known Enums gave me the correct Sip addresses for both - Bill

martin 04-20-2006 10:01 PM


Originally Posted by wildbill
A test on the "Test" button on 2 known Enums gave me the correct Sip addresses for both - Bill

Good stuff Bill. The ENUM Replacement field should give you the functionality you require to dial local numbers and prefix the 61x${EXTEN} to use for ENUM.


In advanced dial plan:

Pattern: 9xxxxxxx
Replacement: 02${EXTEN} <--- This is what gets passed to provider
Provider: <your provider>
ENUM Replacement: 612${EXTEN} <--- This is what gets passed to ENUM

Hope this makes sense.

wildbill 04-21-2006 12:42 AM

Martin - Still getting message "number could not be connected" when using Voxalot -SPA monitor says connected at gw3(Voxalot) but message only - it appears the call is not being sent back to provider for PSTN - dial plan is _[345]xxxxxxx 07${EXTEN} sipme and enum repalcement - 617${EXTEN} - this is for Queensland numbers only - - Bill

martin 04-21-2006 01:06 AM

Hi Bill,

To test your VoXaLot connectivity try:

#3 <wait for tone> 600 <-- This should get to echo test
#3 <wait for tone> 18005551212 <-- This should get to ENUM info service
#3 <wait for tone> Queensland number

If the first 2 fail try re-booting your modem again like you did last time.

wildbill 04-21-2006 01:54 AM

Martin - ADSL Modem and SPA reboot - first 2 tests ok - dial local number and get invalid call -from SPA monitor - PSTN 40364413@gw3 is the number Im trying to call(my fax) - I can also call marks enum test no ok - Bill

martin 04-21-2006 05:06 AM

Do any other sipme numbers work via VoXaLot.

If you ATA is registered with sipme I suspect sipme is rejecting the call due to the inbound call 0740364413 comming from VoXaLot IP address while you are registered at another IP address.

Maybe try not having your ATA register with sipme?

wildbill 04-21-2006 05:21 AM

OK will register Voxalot as proxy on SPA and see how it goes - will post results - Bill

wildbill 04-21-2006 05:55 AM

Martin with Voxalot registered on SPA and [x*][x*]. in dial plan Voip calls and test no all ok however cannot call PSTN or internal Sipme -also tried Sibroker code then Sipme no - monitor shows calls going to Voxalot then Invalid Call State - Bill

All times are GMT. The time now is 08:14 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.