Configure the Zyxel Prestige 2602H-61 for Voxalot.
This thread is started after consulting a moderator.
After reading the tutorial I can still not configure my Zyxel Prestige 2602H-61 for Voxalot. This is what I think it should be. SIP Settings Active SIP v SIP Number xxxxxx SIP Local Port 5060 (1025-65535) SIP Server Address eu.voxalot.com SIP Server Port 5060 (1-65535) REGISTER Server Address eu.voxalot.com REGISTER Server Port 5060 (1-65535) SIP Service Domain voxalot.com Authentication User-ID xxxxxx Password ............ Before this setting this place was set for voipbuster and worked well. I have connection with voxalot by XLite thus that's ok. There I had only to clear the check box by Domain proxy. For the moment I can not found something like that in my Zyxel. |
Voxalot Team please.
Strange.
I was told, by e-mail from the Voxalot Team, that this was the only place to put a question to that team. Even pointing out, in a other topic, the different behavior from the program X-Lite following the tutorial is also not answered. Please, if you don’t understand me say so. Maybe Voxalot is not a program I can use and that is pity. |
Quote:
What happens when you call *600? Try setting the "Authentication User-ID" to xxxxxx@voxalot.com . |
Thanks martin.
The new setting in X-Lite is working fine. Calling *600 was before and is now ok. For the Zyxel I hope someone else can help me with that problem otherwise I can’t use Voxalot. ;( |
Do you have a link for a User's Guide for this device (Zyxel Prestige 2602H-61)?
Are you using this behind another router or is it connected to open internet with a public IP address? Does it have an integrated DSL modem? Does it allow for a STUN server setup ? I've had difficulty setting up another ATA behind a DSL connection in a couple of cases, and have not yet figured out why because the devices worked perfectly on a cable broadband connection. I wonder if the problem is provider related. Maybe somebody out there can shed some light on this. Thanks |
The answers that I can give now are.
It is a extern modem/router an connected to open internet with a fixed ip address. My connection is running, by my isp, over the Tiscali network and therefore my modem has the Tiscali configurations. The firmware is a little different then the standard ZyXEL type. Copy out of modem/router: System Name: adsl-modem ZyNOS F/W Version: V3.40(MS.7)b3-2 | 6/02/2006 DSL FW Version:TI AR7 06.00.04.00 Standard:ADSL2+ Mode For the a User’s Guide I was all ready looking but because of the different types in this modem/router it is not easy to find. Because off new rules in Europe about toxic materials this type has change looks. P-2602R Series is the closets look off it and maybe you can look in that User’s Guide. The question about a STUN server setup I don’t understand. Sorry. |
|
Alas
Tanks andrerio for you configuration picture of your ZyXEL but is not working here.
The only difference there is the SIP#. You have it on SIP2 and I on SIP1. On the SIP2 is here an other vsp set: budgetphone.nl . That is working well. The firewall in my ZyXEL seems not blocking the attempt to connect because the log file is empty after trying to. There can be an other different between us that is de registration. I have simple Voxalot Basic. |
Check think link..
http://forum.voxalot.com/voxalot-sup...h-voxalot.html I got everything working from there. |
Quote:
|
Quote:
|
I've set up a couple of ZyXEL's...
Try putting in voxalot.com for SIP Server, Register Server and Sip Service and then click on the Advanced Setup button and make sure that the Outbound Proxy entry does not contain the name of your previous provider. Infact, replace the Outbound Proxy Server address with eu.voxalot.com and set the port to 5060. I have found this is generally the easiest way. |
On my Voice - Advanced Setting screen MarkLL, I have no Outbound Proxy Server field or something to put addresses in.
In the hope to clear everything that was previous put in my SIP1 configuration I have put back my account what was there before. Thats off sip.voipbuster.com. When I put every data back I was immediate registered to voipbuster.com without pressing a button. Register/UnRegister is done in a few seconds. Putting the data in for Voxalot and it wouldn’t work. The trick for X-Lite to put @voxalot.com after User-Id under Authentication is not helping here. . |
seems my memory was not so good. Sorry about that. The info Originally Posted by ozimarco was correct.
The Correct settings are: (for you) SIP Server Address: eu.voxalot.com REGISTER Server Address: eu.voxalot.com SIP Service Domain: voxalot.com (although eu.voxalot.com also worked for me) In Advanced settings do you have "URL Type" set to SIP? Copy out of router: System Name: P2032RLP1 ZyNOS F/W Version: V3.60(ADO.5) | 06/20/2007 I did have issues trying to use another ITSP so i emailed support and received new firmware. Try the settings above, if that does not work, contact Support and see if there is a firmware update. |
Yes its working now.
Yes its working.
To make a long story short; it was a simple space behind the voxalot.com address in SIP Service Domain field. The other two places with the eu.voxalot.com address have not that problem. There is still a spaces behind. I think that I heaved copy the voxalot.com part with the space from those fields. Thanks every one for helping out and take advantage off my mistake. ;) |
All times are GMT. The time now is 01:02 AM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.