SIP Broker now supports Toll Free terminations
SIP Broker now supports terminations to toll-free numbers in North America. All users of Voxalot and SIP Broker can now dial these toll free numbers by using the SIP Broker dialling convention:
*1800 *1866 *1877 *1888 For example to dial Diners on +1 800 234 6377 within either Voxalot or SIP Broker just dial: *18002346377 The benefit of this solution is that it eliminates the need for you to create special dial plans with specific voice service providers that support 1800 terminations. |
It appears that these are not working currently. Could you please verify? Maybe, I'm missing something. Thanks (Tested *18002632263 - MasterCard)
|
Quote:
|
Thanks, Martin.
Yes, you are right. It works from an IP phone logged on the account, but does not work from an ATA registered on the same account. Not sure why, as *18 is not a documented call feature and the ATA[*] features are actually turned off. I'll do a bit more looking. Note added 2007-07-04 : For the record, the problem was caused by having 2 SIP devices (SIP phone, and ATA) behind NAT logged on to the same account. After some tweaking of the STUN server settings, and port forwarding on the router, I could get both devices to work reliably when calling Toll Free numbers. Also, an incoming call rings both devices until one is picked up or call goes to voicemail. |
Restricted dialing area?
*18663977875 "The number cannot be reached from the dialing area":confused:
|
Quote:
IMHO it should work from most model ATAs out there, with proper setup. The main thing you have to watch for, is to make sure your adapter is setup to send the dial string to SIP Broker (or VoXaLot) and not "eat" those digits. For example, if you were using a LinkSys/Sipura adapter, it's simply a matter of properly setting up your "dial plan" to pass that dialing pattern. The default dial plan for a LinkSys/Sipura adapter doesn't work well for such dialing (and for that matter, the default LinkSys/Sipura dial plan doesn't even support SIP Broker). However, it's reasonably easy to modify the dial plan to properly support all SIP Broker dialing, including the new toll free dialing. |
"Out of area" toll free numbers.
Quote:
While a lot of companies with USA "toll free numbers" allow them to be called from anywhere "in the country", this isn't true of all toll free numbers. Some companies with toll free numbers, choose to limit them to a specific calling area near where their service is. For example, some companies that only serve a single state, may limit their toll free calls to only coming from phones "in that state". Now the problem arrives when you want to call one of these "restricted area" toll free numbers from VoIP. Because, from the perspective of the toll free number you are calling, your call is coming from the place where the SIP Broker service enters the telco lines (for the toll free call), which is likely not anywhere near where you physically have your own VoIP located. And if SIP Broker enters the telco service outside the "calling area" of your toll free provider, than you will likely get a message such as you experienced. So what can you do about it? Not much, I'm afraid. You can try alternate toll free services (for example, when SIP Broker's doesn't work, try FWD's, etc), in the hopes of "getting lucky" and having one of the VoIP to toll free "gateways" being "local" to the toll free number you want to call. Or you could try borrowing a local telco/POTS phone if/when you just have to call that toll free number. Or you could even try talking the company with that toll free number into changing it so that it works in more areas/states in the USA (fat chance with some companies). But in the end, this is a limit of how the company you are calling chose to setup their toll free number. So ultimately, it is neither in your hands nor in SIP Broker's, but rather in the hands of the company who setup that specific toll free number... |
Hello,
I was just wondering if there are any plans for allowing calls to free phone (aka toll free) numbers in the UK (0500, 0800, 0808)? This would be really useful as I occasionally need to call these numbers, and they aren't free from my mobile (but local calls to the PSTN access number are). Thanks in advance, James |
UK Toll free, may be possible via Free World Dialup.
Quote:
FWD toll free info So in theory at least (I don't know any UK toll free numbers to test this against), you should be able to dial UK toll free numbers (from VoXaLot, SIPBroker, or the SIPBroker PSTN numbers), by first dialing *393 and then dialing the FWD code for a toll free UK number. NOTE: Don't forget that FWD's toll free dialing also starts with the *-key. Which means that if/when you use your own adapter to dial this sequence, you would have to make sure that you can enter the *-key also in the MIDDLE of your dialing (as * is a special dialing key for both SIP Broker and for Free World Dialup, and you would need to use it in both places to dial: SIP Broker => FWD => UK toll free ). And "by default" most VoIP adapters won't let you use the *-key anywhere other than the first character. So you might want to check your VoIP adapter's configuration before trying this (for example, LinkSys/Sipura adapters need their "Dial Plan" customized before this sort of dialing will work)... |
Hello DracoFelis,
Thank you very much for this. I've tried this from Gizmo and the PSTN access number, and both work fine :) (apart from connection taking about a minute from the PSTN number). I was just wondering though, do you know what "restrictions" there are on toll free number calling? The FWD website mentions there are restrictions, but doesn't say what. James |
Quote:
If you are really curious, you might want to try asking in the FWD support forums (registration required for the FWD forums, as they have a lot of jerks that like to SPAM them): FWD User Forums :: Index |
It is not necessary to put the * in front of the dialed US toll free number. Since SIPBroker's default (if you don't dial a prefix) is to route the call via ENUM, calls are terminated via one of the three partners on ENUM who have registered to handle toll free calls.
Don't believe me? I just tested it by dialing into SIPBroker's Anaheim, CA, access number and dialing 1-800-555-8355-#. In a few seconds I was greeted by TellMe's welcome message. By not dialing * first, you will not bump into Sipura/Linksys' "Use RTP Encryption" feature code (*18). |
Quote:
|
Quote:
|
Quote:
|
How would I add this toll-free check into a Voxalot dialplan? I've got a provider setup to take all US 10 and 11 digit calls, but they charge for 800 calls.
I was hoping to set up something that would catch the 4 toll-free area codes, but I can't think of a way of doing it in one check, only 4 different checks. The closest I got was: _18[0678][0678]X. But that hits non toll free area codes too (e.g. 1806...). |
You will have to use 4 different checks. ENUM should be catching toll free numbers if it's enabled, but to force free toll free calls I have the following in my dial plan:
Code:
# Pattern Replacement Provider |
Toll free in other countries
I have allowed for toll free calls to Germany, Luxembourg, the Netherlands, Norway, USA and Canada using instructions found on the wiki, as well as those in country code 800. Being in the UK, I have no problem there.
I am wondering whether I might be able to reach toll free numbers in any further countries, notably Belgium, France and Ireland. I haven't seen any way to do so yet, but if it has been found, could someone please advise? |
Toll-free for Netherlands, is not working anymore, so,*393*31800....
will give no connection, the "XS4ALL provided" message can still be heard, then no connection....:( |
Quote:
However, one thing that you might try, is to see if there are any VoIP providers who are located in (and specifically service) the countries that you are interested in. And, if there are, look over the cost info carefully on that company's web site, to see if they include toll free calling "for free" as part of their service (or if you have to pay for it). And if they do include free "toll free" calling (for a country you are interested in), consider signing up for a minimum prepay account with that provider (assuming the minimum isn't too high to make it not worthwhile). i.e. If you can find a VoIP company that has (as part of their package) the toll free calling you want, you should (in most cases) be able to set them up as a provider in VoXaLot, and route your toll free calling (for that country) to that provider. Of course, this will mean you will have to create an account with that VoIP company, and many VoIP companies have a minimum prepay amount for opening an account. But if that prepay is "low enough" (and you don't get socked for things like monthly fees), it might see be "worthwhile" if that gives you "free" access to the toll free calling you are looking for... BTW: I actually do something similar with my SIPphone/Gizmo5 account. While I don't use it for calling "toll free" numbers per se (as I have other ways to route the toll free numbers I want to call), I do use it to make "free calls". Specifically, the main use I have for my SIPphone account (which currently has zero balance) is simply to let me make free "Backdoor Dialing" ( Gizmo5 - Make free internet calls from your mobile phone and computer - Back Door ) calls from family ATAs connected to VoXaLot. i.e. I setup my SIPphone account as a provider in the VoXaLot accounts (yes, more than one) used by my family, and then setup the VoXaLot dial plans to support the free BackDoor dialing. In fact, I even setup the VoXaLot dial plan (on one family member's VoIP phone) to "hard code" a handful of common numbers (that I previously confirmed work with Backdoor Dialing) so that they always take "the free route" by default even if/when the special code to engage "Backdoor Dialing" wasn't dialed with those numbers. |
Dutch tollfree via Sipbroker still down !
|
Quote:
Any chance, this will be up and running again ? There seems to be no alternative...... |
tollfree dialing inconsistency
I could dial the same tollfree number 5 times and only 2 times i got through. the rest I just got a fast busy signal. how come?
|
Quote:
|
I'm using sipbroker to call 800 numbers in the US and the calls are dropping after 30 seconds. Anybody experience this problem?
|
There's been some people abusing the US toll free tonight...
I run TollFreeGateway.com and we were getting hit with this... sipbroker sends some of the TF to us.... trying to find someone on staff with sip broker to get this resolved... |
Quote:
|
I dont know why you're getting calls dropped, we're currently blocking all calls from the sip broker proxy to toll free numbers...
other carriers could be having issues due to the unwanted calls... in the mean time, you are free to send North American toll free direct to sip.tollfreegateway.com asterisk exten=>1800NXXXXXX,1,Dial(SIP/sip.tollfreegateway.com/${EXTEN}) Please Note, we are based in the US and can not guarantee delivery to every canadian TF number at this time |
@TollFreeGateway I have sent you an email.
|
Thanks Martin! I got your email and replied... Also, I have unblocked your proxy in question... so have at it guys...
Ken |
I'm trying to find a way to call "country-independent" free European numbers like 00 800 22 88 3503. This sample number is reachable from many EU countries as well as from UK.
This sample number is listed in ENUM - both e164.org and e164.info are responding with sip:80022883503@public.sip.magrathea.net Dialing *01380022883503@sipbroker.com gives me mainly errors, while I've been able to connect once. Question - is there a way to connect to such numbers reliable? |
Quote:
|
Quote:
|
Using linksyspap2t dial string
L:20,S:7,(x|*xx|911S0|1[2-9]xx[2-9]xxxxxxS0<:@sipbroker.com>|[x*][x*].<:@sipbroker.com>|<#:>[x*][x*].) Dialing toll free numbers does nothing? Am I the only one? |
Quote:
|
Can we do it without the * nonsense? Check sipbroker.com for all calls UNLESS i prepend with *
Quote:
|
Quote:
When you use SipBroker for toll-free termination you get kind of a roulette choice of termination providers, not all of which can reach all toll free numbers. Rather than using SipBroker for toll-free calls, I prefer to choose the providers with the lowest ping time from my IP address to their RTP connection address. Below are a few providers along with their RTP address (as of last time I checked). Some of these providers accept toll-free numbers with or without the 1 (country code). Code:
Dial plan entry to get you there RTP connection address |
Thanks!
By the looks of it one has to dial a # and then number for the service selected. Ideally I would like to have 1) auto sipbroker check for all numeric calls, 2) then send to default provider prepended with a 9 for call numeric calls, 3) pass *XXX untouched for asterisk voicemail, 4) force all toll free calls through one of the below providers below. I have items 2 & 3 covered by the current dial string (*xxx|<:9>xx.|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) thanks |
Quote:
800[2-9]xxxxxxS0<:@voiper.ipkall.com:5060>| 866[2-9]xxxxxxS0<:@voiper.ipkall.com:5060>| 877[2-9]xxxxxxS0<:@voiper.ipkall.com:5060>| 888[2-9]xxxxxxS0<:@voiper.ipkall.com:5060>| 1800[2-9]xxxxxxS0<:@proxy.ideasip.com:5060>| 1866[2-9]xxxxxxS0<:@proxy.ideasip.com:5060>| 1877[2-9]xxxxxxS0<:@proxy.ideasip.com:5060>| 1888[2-9]xxxxxxS0<:@proxy.ideasip.com:5060>| Note that ":5060" is needed after each host name if the ATA is configured with "Use DNS SRV:" and "DNS SRV Auto Prefix:" both set "yes". This is not necessary for sipbroker.com because there exists a DNS entry that will get you to sipbroker.com no matter if the ATA does a DNS SRV lookup on _sip._udp.sipbroker.com. Quote:
|
All times are GMT. The time now is 12:24 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.