SPA3K / Voice Mail Problem
Hi, this is a tricky problem to describe, so apologies for the long post.
My Setup: Voxalot registered Line 1 on the SPA3K. PSTN set to ring through. User 1 set to forward to my voxalot number after 12 seconds. What used to happen:
What happens now (since performance tuning I think):
What usually appears to happen is:
I see two problems here: The first is the behaviour of the SPA3K - when the incoming PSTN drops off, it should tear down the forwarded call to Voxalot. If I can be motivated, I might log a call with Linksys just for the amusement of finding out what their non-response will be. The second problem isn't really a problem, but a change in the behaviour I used to observe with Voxalot - what used to happen is that the moment the incoming call hit the call forward no answer timeout set in the SPA (12 seconds - about 4 rings), it would forward to my voxalot account, and voxalot voice mail would answer immediately (presumably because it saw that the call was coming from the same voxalot account as was being called). Because this is no longer happening, and because the default voxalot voice mail time out is 20 or 30 seconds, people give up and I get long recordings of dial tone etc. I'd love the old behaviour back - if Voxalot gets a call forwarded to the same account as the call is coming from, it goes to voice mail. |
Hello,
What do you exactly write on cfwd dest on the SPA? |
9nnnnn where 9nnnnn is my voxalot number.
|
I can confirm this behavior!
We really need a way to FW directly to a certain number VM: something like *999 123456 where 123456 is the Voxalot Number and *999 is a sipbroker sipcode to go straight to voicemail ... in this way it would be very easy to use VM forwarding also within the call forwarding rules. |
All times are GMT. The time now is 01:29 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.