|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
04-03-2008, 11:15 PM | #1 |
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
*500 to voicemail does not work
When I dial *500 from my ATA I get a recording "We're sorry. The number you have dialed cannot be connected." If I dial a SIPBROKER access number and then dial *010 500, I get into voicemail.
What to do? Thanks, Paul Last edited by psehorne; 04-04-2008 at 03:29 AM. Reason: requesting email notification |
04-04-2008, 12:22 AM | #2 | |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Quote:
This is likely a Dial Plan issue, either with the Dial Plan in your ATA....or one of the Dial Rules in VoXalot maybe interfering... 1. Under Smart Call/Dial Plan when logged into VoXalot there is a test field, type *500 and see what it says regarding how it'll route this call (if you happen to have any dial plans that utilize *, that could be the issue..... If everything looks fine there 2. Save your current ATA dialplan on a text file so you can restore it if need be, and set your dial plan in the ATA to just [*x][*x]. (this is Linksys specific, so depending on your ATA it may need to be tweaked) Hopefully one of those two will change things, or point you to the problem The fact that you are getting that message, means the call is hitting VoXalot though, which means it is likely the first case.... Question: Was this working before, or is it the first time you try it? |
|
04-04-2008, 03:11 AM | #3 | |||||
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
Quote:
Quote:
Quote:
Quote:
Quote:
Paul |
|||||
04-04-2008, 03:18 AM | #4 | |
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
Quote:
Paul |
|
04-04-2008, 04:04 AM | #5 |
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts |
Hmm....,
What happens if you just call 500 (without *)? |
04-04-2008, 04:09 AM | #6 |
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Thanks: 70 Thanked 147 Times in 115 Posts |
Try dialing 500 from your ATA to get to your Voicemail.
This should work as Voxalot supports it. This issue is probably caused by the local Call Features "*xx" codes used by Grandstream in their ATA. The code *50 disables call waiting and only the last 0 would be passed on to Voxalot, when you dial *500. This results in the message "We're sorry. The number you have dialed cannot be connected." Another option is to set "Enable Call Features" to No in the set-up screen. Keep in mind that calls starting with an "*" and followed by 2 digits that match any one of the call features as used by a Grandstream ATA, will not go through correctly as the ATA will chew out the first three characters. They will never pass on to Voxalot. So if you want to keep the ATA Call features active, you will have to create a dial plan such that you can still call sipbroker codes where this problem occurs. For example, to call a Pennytel extension, instead of dialing *234-123456, you could dial 9*234123456. Then set up a dial plan such that matches on _9*xx. with a replacement of ${Exten:1} sent via Provider - Sipbroker. This bypsses the ATA's call features filter and lets the dialed number get to Voxalot. By the way *23 is the Call feature code for 3-Way conference on the Grandstream ATA. Hope this helps .......... |
04-04-2008, 04:24 AM | #7 |
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
I get told "I'm sorry, your call cannot be completed as dialed"
CORRECTION: It works if I just dial 500. Thanks, Paul Last edited by psehorne; 04-04-2008 at 04:36 AM. Reason: correcting content |
04-04-2008, 04:39 AM | #8 | |
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
Quote:
Dialing 500 without the asterisk worked. Thanks, Paul |
|
04-04-2008, 05:08 AM | #9 |
Junior Member
Join Date: Nov 2007
Posts: 16
Thanks: 2 Thanked 2 Times in 2 Posts |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voicemail Does Not Work | LinkMM | Voxalot Support | 1 | 10-11-2007 04:06 AM |
Voicemail Issue | richard | Voxalot Support | 8 | 05-08-2007 03:23 AM |
Suggestion: Quick Access to Voicemail via SipBroker | richard | Voxalot Support | 0 | 05-05-2007 02:05 PM |
Voicemail does not work for registered providers | roman1 | Voxalot Support | 7 | 03-06-2007 08:41 AM |
Voicemail default password won't work | rossmurray | Voxalot Support | 1 | 12-06-2006 11:51 AM |