|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
05-04-2007, 06:52 PM | #1 |
Senior Member
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14 Thanked 22 Times in 19 Posts |
Can not receive Call Voxalot (Busy tone)
Hi Martin
Incoming call on voxalot and sip call forwarding not working, on both getting busy tone. It was Ok till yesterday. Thanks Last edited by richard99; 05-04-2007 at 07:16 PM. |
05-04-2007, 10:12 PM | #2 |
Junior Member
Join Date: Apr 2007
Posts: 20
Thanks: 5 Thanked 3 Times in 3 Posts |
Same here... when I call another voxalot user, get a few seconds of "nothing", then a busy tone.
Any help appreciated. I'm calling from voxalot 299036 to voxalot 441298. Best wishes, -Santiago voxalot: 299036 FWD: 299036 |
05-04-2007, 10:29 PM | #3 |
Join Date: Apr 2006
Location: Vancouver, BC
Posts: 296
Thanks: 94 Thanked 53 Times in 27 Posts |
NAT/router problems?
richard99: What device are you using? Are your settings good? Did your router change? What happens if you use an X-lite softphone with your Voxalot information, does it work then? stezanos: Has it ever worked? What device are you using and are your settings good? Can you reach the *500 VM and the *600 echo test at least? |
05-05-2007, 03:38 AM | #4 |
Senior Member
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14 Thanked 22 Times in 19 Posts |
Incoming busy tone
Echo test *600 and VM *500 are working fine. All outgoing call have absolutely no problem. But for incomming calls to Voxalot (url sip calls), sipnumber registred to voxalot and call to FWD are not working in sense that other party get busy tone.
Last edited by richard99; 05-05-2007 at 03:41 AM. |
05-05-2007, 03:57 AM | #5 |
Junior Member
Join Date: Apr 2007
Posts: 20
Thanks: 5 Thanked 3 Times in 3 Posts |
Ctylor: yes, it worked.
It's not my device, I'll ask them to test those numbers. It's a family device, half way across the world. Hint: Having SAME problem with FWD in the other line (line 2). Voxalot on line 1. It used to work well, actually VERY well. Calls can be placed from there, but they cannot receive. Regards, Santiago |
05-05-2007, 03:58 AM | #6 |
Junior Member
Join Date: Apr 2007
Posts: 20
Thanks: 5 Thanked 3 Times in 3 Posts |
EXACTLY same problem as Richard99.
Voxalot on line 1 FWD on line 2. Everything used to work perfectly well, and it's failing now. Can place calls from the device (both on voxalot and FWD) but cannot receive. Thanks, Santiago |
05-05-2007, 11:17 AM | #7 |
Senior Member
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14 Thanked 22 Times in 19 Posts |
Busy tone for Incoming
Hi Martin,
Problem is still contineou and getting busy tone to recevie call on Voxalot, either calling uisng sip broker PSTN number and then *010 xxxxxx or call forwarding to sip:xxxxxx@voxalot.com. In both case caller getting busy tone. Thanks |
05-05-2007, 01:03 PM | #8 | |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Quote:
Might sound like a weird question, but in the dial plan test field, when you enter your Voxalot extension xxxxxx does it match one of your dial plan entries? If so, please disable the corresponding rules (set active=No) and confirm if that fixes the problem. This is not the permanent fix however it will verify an assumption re: your problem.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|
05-05-2007, 04:21 PM | #9 |
Senior Member
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14 Thanked 22 Times in 19 Posts |
Working now
Martin
Well, now working. I de-activated all dial plan and re-activated again. That apprently fix the problem. But no logic, before I repoted the problem I was calling Sip pstn number for chicago 1-312-205-6444 and then using *010xxxxxx. Once again thanks for your support and quick feed back |
05-05-2007, 05:49 PM | #10 |
Junior Member
Join Date: Apr 2007
Posts: 20
Thanks: 5 Thanked 3 Times in 3 Posts |
Hi Martin and Richard,
Dismiss my previous message, finally after testing a zillion things, I found it was the NETWORK PLUG which was crap!!!! First thing to test should have been that! Everything working perfectly right now. Regards, Santiago |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
No busy tone with Betamax via Voxalot | tomblandford | Voxalot Support | 5 | 04-18-2007 10:03 AM |
Call Quality and Voxalot | shibukraj | Voxalot Support | 1 | 12-01-2006 03:39 AM |
What am I doing wrong here? | code- | Voxalot Support | 16 | 10-20-2006 05:12 PM |
Newbie - but please be nice | Mallycat | Voxalot Support | 21 | 04-15-2006 07:50 AM |