|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
05-30-2008, 03:25 AM | #1 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Outgoing calls to PSTN drops after several seconds when using alternative ports only
Hi All
I was helping friend configure his eyeBeam on a network where he does not have control of the router and he is having outbound call dropping issues and incoming one-way audio issues. Here is the interesting part. 1. Outbound calls DO NOT drop if his proxy is set to port 5060. 2. Outbound calls DROP after 30 to 60 secons if his proxy is set to 2060, 3060, 4060, 443 or 80. Inbound calls get one-way audio when eyeBeam proxy is set to 5060 (can hear remote caller, but they cannot her my friend). It is because of this problem I tried to use the alternative proxy ports. Proxy ports 2060, 3060, 4060, 443 and 80 all result in FULL TWO WAY AUDIO for incoming calls via DID number ;-), but as I mentioned above, outbound calls drop after 30 to 60 seconds. Anyhow seen this type of problem before? Know what's causing it and have a possible solution? Thanks in advance Richard |
12-03-2009, 03:34 PM | #2 |
Junior Member
Join Date: Dec 2009
Posts: 1
Thanks: 0 Thanked 0 Times in 0 Posts |
Can some one pleaase help in this regards, calls when dialed out on alternative ports drop after 20 seconds. I am sure the ata/oftphone is regisrtered because i can dial in. Again no issue when using 5060.
I am tried xlite/express talk/ and netgear ATA. Have been at this for atleat two months no salution, Please help. |
12-03-2009, 07:18 PM | #3 |
Senior Member
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7 Thanked 26 Times in 21 Posts |
See your device configuration. Look at Setting up Linksys PAP2 - Voxalot FAQ.
To use alternate SIP ports such as 2060, you should configure not only 'Proxy' but also 'Outbound Proxy'. In both you should have something like 'us.voxalot.com:2060'. You should also have enabled the use of Outbound Proxy in your ATA or softphone settings. If you don't do it, your connection wouldn't work properly. Regards, Last edited by carlosalbffgomes; 12-03-2009 at 09:49 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free DID Numbers, Free Voip Calls, & more Voip Info | amroe | Voxalot General | 54 | 01-13-2014 09:11 AM |
VoIP situation in Japan - how to improve with ENUM and peering. | v164 | Voxalot General | 2 | 02-02-2008 03:05 PM |
Calls from PSTN dropped in 30 seconds. No ACK message. | 910198 | Voxalot Support | 6 | 08-28-2007 11:56 AM |
Outgoing calls to PSTN with voipbuster issues. | turbodiesel | Voxalot Support | 2 | 01-18-2007 05:38 AM |
Argh! Outgoing PSTN nightmare with 488 | ptruman | Voxalot Support | 0 | 09-30-2006 05:01 PM |