|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
10-26-2006, 08:54 AM | #1 |
Junior Member
Join Date: Oct 2006
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts |
How to configure my speedtouch 716 WL v5
Hi,
I've a Tele2box (a Speedtouch 716 WL v5) which is working fine with voipbuster. However, I'm not able to register it with Voxalot. What's wrong in my config hereafter: Registrar: voxalot.com Registrar Port: 5060 Proxy: voxalot.com Proxy Port: 5060 Expire Time: 3600 SIP URI: 444719 Username: 444719 Displayname: 444719 Thanks to your help. Jim |
10-26-2006, 10:05 AM | #2 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Not familar with this device, however something that jumps out at me is:
SIP URI: 444719 A URI is typically: sip:444719@voxalot.com or 444719@voxalot.com
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
10-26-2006, 10:15 AM | #3 |
Junior Member
Join Date: Oct 2006
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts |
I'll try it this afternoon but it worked with my tele2 sip connection.
I think that it build it's URI with [URI]+[domain] but I will verify it this afternoon. thanks to your help. |
10-26-2006, 01:36 PM | #4 |
Senior Member
Join Date: Oct 2006
Posts: 162
Thanks: 9 Thanked 1 Times in 1 Posts |
I bought a Speedtouch 716 WL with voip but i cant manage it to work with my ADSL company here in Norway, i bought it from UK. I think i need to change the firmware, anyone know where to get it ?
|
10-26-2006, 01:40 PM | #5 |
Junior Member
Join Date: Oct 2006
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts |
Speedtouch firmware
You'll find it at http://www.speedtouch.co.uk/716.asp
or in Dutch (but firmware in English) in lastest release at: http://www.speedtouch.nl |
12-03-2006, 12:59 PM | #6 |
Junior Member
Join Date: Dec 2006
Posts: 17
Thanks: 7 Thanked 0 Times in 0 Posts |
I have the the speedtouch 780 (supplied by *be) and I worked out how to use it for sipgate or voipbuster but can't work the settings for voxalot just like 444719 above. I've tested my dial plans and they should work from my handset.
The setting I we bothe require are: Expert Configure Registrar: (is this just voxalot.com ?) Resgistrar Port: 5060 (should we just leave this as is ?) Proxy: (is this again voxalot.com ?) Proxy Port: 5060 (should we leave this as is ?) Expire Time: 3600 (should we leave this as is ?) Configure Sip URI: {voxalotnumber} Username: {voxalotnumber} Password: {voxalotpassword} If I use the settings as I've put here the Configure settings show a big green 'check'. If I add @voxalot.com to the Sip URI this becomes a big red 'cross'. Can anyone help us? |
12-03-2006, 06:20 PM | #7 |
Junior Member
Join Date: Dec 2006
Posts: 17
Thanks: 7 Thanked 0 Times in 0 Posts |
My router decided to reset itself today and lose all the settings. I had to put them in as I suggested above and it all seems to work.
Not sure why it didn't before but if yours doesn't work try switching it on and off from the back or barring that reach for a paperclip and locate the reset button. Be sure to not press this reset for longer than 8 seconds or you'll lose the software installed by your ISP. Make sure you change the 'configure' AND 'expert configure' settings as I describe above as they both need to refer to Voxalot. Maybe the original poster of this question didn't change both settings? |
12-07-2006, 11:37 AM | #8 |
Junior Member
Join Date: Dec 2006
Posts: 17
Thanks: 7 Thanked 0 Times in 0 Posts |
One more note regarding both these routers is that you can only setup/register one SIP provider (up to 2 accounts).
This means it's best to set up with voxalot but to get the phone to ring with voip calls you'll need to setup with e164.org and register your PSTN (landline) and link your voxalot account details to the registered PSTN number. To do this sign up at e164.org. Note that your area code (eg. 020 in the UK) needs to have the leading 0 dropped so the numbers all appear in the international number format. Confirm you want to have a call back on this number and a confirmation code is read out to you. NOTE that his takes around 15 minutes to recieve this call. When you're number is registered, login to e164 and go to the tab 'phonenumbers'. You'll see the telephone numbers that you registered here. Click on the 'ENUM RECORDS' link next to the telephone number you wish to link your voip numbers to. Click on 'Add ENUM Record' Add your voip provider's number, making sure to use the full @ address. Most voip numbers require the Sip setting in that little drop-down menu Click on save. I hope this helps someone in the future as I had to search for days to get this working. Best of luck! Last edited by rossmurray; 12-07-2006 at 11:38 AM. Reason: typo |
02-18-2007, 12:08 PM | #9 | |
Junior Member
Join Date: Jan 2007
Posts: 10
Thanks: 0 Thanked 0 Times in 0 Posts |
Quote:
us.voxalot.com eu.voxalot.com au.voxalot.com one of the three above, depence where you are located on this small planet earth! Good luck Last edited by gertitombo; 02-18-2007 at 12:11 PM. |
|
04-02-2007, 03:47 PM | #10 | |
Junior Member
Join Date: Apr 2007
Posts: 1
Thanks: 0 Thanked 0 Times in 0 Posts |
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
configure voxalot | haiflosse | Voxalot Support | 2 | 05-12-2007 02:05 PM |
Thomson Speedtouch 780WL VOIP Router | chrisdtvuk | Voxalot Support | 3 | 03-20-2007 01:03 AM |
How to configure X-Lite? | findvoip | Voxalot Support | 1 | 09-29-2006 10:27 AM |
I set up X-Lite 3.0 How to configure it? | findvoip | Voxalot Support | 0 | 09-22-2006 08:53 AM |