|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
08-03-2007, 02:52 PM | #1 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Can't make outgoing calls on Voxalot
Hi
I have a Voxalot account configured for my Dad on a SPA-1001 (line 1) with VoipBuster as a outgoing service provided on Voxalot. It has been configured like this for weeks and has been worked perfectly. All of a sudden (a few days ago), my Dad can no longer make outgoing calls on line 1 via Voxalot. He can't make calls to PSTN numbers via VoipBuster or calls within the Voxalot network (ie: 500 and 600). Strangely enough he can receive inbound calls via a DIDWW DID which is pointed to his voxalot account. I am not near my Dad and have not been able to visit him to do any tests, but I can confirm: 1. Its logged into Voxalot 2. He gets dead air when he tries to dial out on line 1 3. His MWI on Voxalot shows a message waiting (shutter tone heard) 4. SPA shows both lines status as "Registered" 4. Line 2, which is directly configured for VoipBuster WORKS FINE!!! (It's on port 5061). When I get to his house again, I was going to try other ports, ie: 4060, but haven't made it there yet. Martin or anyone else, any idea what could have suddently gone wrong? Could it be a change with my ISP? Could it be something specifically wrong with his Voxalot account? Any help would be appreciated. Thanks Richard |
08-04-2007, 07:02 AM | #2 |
Junior Member
|
I'm new at this but own a SPA1001 myself
I am just learning from the guy's out here how some of this stuff works. You're problem is very similar to what I experienced till I finally got everything tweaked. The only thing is that you had a configuration that worked and now it doesn't which may be out of my league. But of course the first thing that comes to mind is the "vanilla" dial plan "([x*][x*].)" without the quotes, in the ATA and by having that, you leave all controls to the smart dial plan within voxalot.com's web interface.
What I've found is priority is the key. I didn't read much on what country this is in. I happen to be in the USA, Los Angeles to be exact. So getting things going would probably be easy for me to help if you were in the USA, otherwise I am a man, I can admit I am new at this and we'll leave the tough stuff to the guy's on here that were of so much help to me. So please indicate what smart dial plan's you have and the priorities of which provider they route through. Are you a lite or higher member? I'm sure you know that many providers do not require to be registered in order to make an outbound call. This tends to be more common if you want incoming calls. Scott Be patient with me, I'm new at this! |
08-04-2007, 09:14 AM | #3 | |
Member
Join Date: Mar 2006
Posts: 65
Thanks: 11 Thanked 11 Times in 9 Posts |
smz, I know i linked this in another thread but take a look at this thread for numerous dial plans. Here is my updated dial plan:
Code:
Priority Pattern Replacement Provider 1 _911 ${EXTEN} Callcentric 30 _0114[479]800. *${EXTEN:3} FWD (International Toll Free ) 31 _01131800. *${EXTEN:3} FWD 32 _01144500. *${EXTEN:3} FWD 33 _01144808. *${EXTEN:3} FWD 34 _01149130. *${EXTEN:3} FWD 40 _011XX. 00${EXTEN:3} VoipDiscount 51 _#1XX. ${EXTEN:2} Callcentric 52 _#2XX. ${EXTEN:2} Vbuzzer 411 _411 *18004664411 SIP Broker (Google 411) 800 _1800. *${EXTEN} SIP Broker (ENUM Lookup disabled) 866 _1866. *${EXTEN} SIP Broker 877 _1877. *${EXTEN} SIP Broker 888 _1888. *${EXTEN} SIP Broker 999 _1NXXNXXXXXX 00${EXTEN} VoipDiscount Quote:
( required 911S0| Immediately send out 911. #x<:1253>[2-9]xxxxxx| send any 7 digit number prefixed with a # and number (such as #2 + 123-4567) will be sent out as #1-1-253-123-4567. #x<:1>[2-9]xx[2-9]xxxxxxS0| Similar to above except for 10 digits. #x1[2-9]xx[2-9]xxxxxxS0| Again similar to the above except the 1 is included (1-555-123-4567 will be prefixed with a #1+1-555-123-4567) <:1253>[2-9]xxxxxx| Send any 7 digit number as 1-253-123-4567. <:1>[2-9]xx[2-9]xxxxxxS0| Prefix any 10 digit number with a 1. 1[2-9]xx[2-9]xxxxxxS0| Any 11 digit number is sent as is. [x*][x*]. Anything else dialed is valid using this pattern. ) required You will have to change 253 to your area code. You will also need to change 911 as VoipCheap does not handle 911. The S0 (that's an S as is snake and 0 as in zero). The entry's that begin with #x allows me to route calls via a different provider in VoXaLot. Notice in the VoXaLot Smart Call list I have a #1XX. pattern that routes through Callcentric. |
|
08-04-2007, 02:41 PM | #4 | |
Join Date: Apr 2006
Posts: 799
Thanks: 66 Thanked 61 Times in 44 Posts |
Quote:
(*[56]00S0|[x*][x*].) It gives immediate dialing of *500 and *600 with the "S0" component. Without using S0 where you can, you will add a delay before your ATA sends the dialed number to Voxalot for processing. |
|
08-04-2007, 07:50 PM | #5 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Thanks guys for your feedback, but I don't see how it can be the dial plan since it was working for weeks and just suddently stopped.
I can't access my dad device properly remotely. For some reason I can access his SPA via the web and login as a "user" and see and change setting, but as an "Admin" its giving trouble :-( I'm pretty sure the dial-plan is as it always was and setup correctly, but I'll have to double check it when I'm in the same city as he is. Hopefully soon. If its not the dialplan what else can it be? Richard |
08-04-2007, 10:16 PM | #6 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Your problem does indeed sound like it is device related. Have you been able to restart the device at all?
.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
08-05-2007, 06:56 AM | #7 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Hi Martin
I did have my Dad unplug the device and router and re-plug them in. Also, I am now able to fully access the device remotely can have found the following info: Dial Plan (Default Plan) (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) I believe thsi dial-plan would allow almost any dialing sequence to be put in. Attached please find screenshots of my SPA-1001 System Info Page (slip into two pages), but my Line 1 and Line 2 config (real usernames substituted). I believe both line 1 and line 2 are configured correctly. Keep in mind everything was working fine and just stopped. Does anyone see any problems in my line 1 config. Thanks Richard |
08-05-2007, 07:27 AM | #8 |
Member
Join Date: Mar 2006
Posts: 65
Thanks: 11 Thanked 11 Times in 9 Posts |
Richard, looking at your screen shots and my setup I notice a few differences:
NAT Mapping Enable: Yes NAT Keep Alive Enable: Yes Use OB Proxy In Dialog: No Use DNS SRV: Yes DNS SRV Auto Prefix: Yes Proxy Redundancy Method: Based on SRV Port Use Pref Codec Only: No |
08-07-2007, 04:06 AM | #9 |
Senior Member
Join Date: Mar 2006
Posts: 153
Thanks: 37 Thanked 7 Times in 7 Posts |
Hi wmp
I tried the settings you mentioned but they didn't work. What did work was that I was able to configure Line 2 (L2) to Voxalot thus having both L1 & L2 registered to the same Voxalot account (one on port 5060 (L1) and the other on 5061 (L2). Switching the port numbers between L1 & L2 didn't seem to make line 1 work and I also think Line 2 stopped working. Anyhow, L2, registered to Voxalot works fine. I'm back in the same town as my Dad, (Well still 30 minutes away) so I'll try to go over and run some more tests. I want to consider now that perhaps the SPA-1001 Line 1 is not working properly or maybe the device needs a factory reset. (Can't do that from here). Thanks for your help... Any other suggestions would be appreciated. Richard |
08-20-2007, 01:30 AM | #10 |
Junior Member
Join Date: Apr 2007
Posts: 15
Thanks: 7 Thanked 1 Times in 1 Posts |
Probable solution
I had the same problem and found that outgoing calls with Voxalot only did not work if CID was disabled. Other providers used were OK.
In my Linksys SPA3102 User 1 tab there is a Block CID Setting:no Somehow this got changed to yes and when I set this back to no all began to work fine. There may be something similar in your hardware settings. I spent days trying all sort of things before I got to this. Hope this may help you. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Free DID Numbers, Free Voip Calls, & more Voip Info | amroe | Voxalot General | 54 | 01-13-2014 09:11 AM |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
Voicestick unable to make outgoing calls | 244751 | Voxalot Support | 4 | 02-16-2007 02:23 AM |
Voxalot --> Voxalot calls are not getting completed? Any issues | shibukraj | Voxalot Support | 2 | 01-09-2007 04:16 AM |
Any outages with Voxalot Service - No Outgoing calls | shibukraj | Voxalot Support | 5 | 11-21-2006 05:02 PM |