Quote:
Originally Posted by emoci
You are correct for that part....
The SipBroker access number you are using, does it seem to work fine when you call your VoXPremium acct?
|
Yes, I had tested that and it was fine.
Quote:
I would do a reset on that incoming VoXalot trunk anyway (you know: click on Trunk, Save Settings, Confirm Changes by clicking red bar procedure)....If that doesn't seem to do anything turn the trunk to just outbound calls, then re-register it for both incoming and outgoing
|
In fact since posting my last message, I noticed that there was only one Voxalot trunk showing under the status tab (eu.voxalot.com). So I changed one of the two to us.voxalot.com and saw both appear. Then I changed it back and - voilÃ* - the trunk started to work!
Quote:
BTW, the host you are using for voxalot there is of the form xx.voxalot.com (xx= us or eu or au) not just voxalot.com right (since voxalot.com has been removed as a valid registrar adress)
|
Yes, see above.
Calls now appear in Call Monitor, but now my problem is at the end of the call setup sequence. I get dialtone but when I dial out, there is no ringtone, then dialtone reappears. I think it might be a dialplan problem. . .
ataboy