*1800 smart call and prefixing

calebsg · 09-30-2007, 07:18 AM

Hi,

I'm a noobie to this. Can someone help me with:

How to set up a smart call rule that will automatically convert a dialed (NA) toll free (e.g., 1-800/1-888 etc) to *1800 etc?
set up smart call rule to prepend 1604 to 7 digit numbers?

Thanks for your help,
Caleb

kurun · 09-30-2007, 07:56 AM

Go to Smart Call (Dial plan), click Add and go to Advanced mode, and enter

Pattern _1800xxxxxxx or _1800. [Note that the "." is part of the statement]
Replacement *${EXTEN}
Provider Sip Broker
Active Yes
Virtual Toll Free, Enum Look Up, Geographic Look Up set to No (You may want to experiment with these once you get the basic plan working)

Repeat the above for 1866, 1888 etc.

For the 7 digit numbers, try the following:

Pattern _Zxxxxxx
Replacement 1604${EXTEN}
Provider Voip_Service_Provider
Active Yes
Virtual Toll Free, Enum Look Up, Geographic Look Up set to No (Again experiment later)

Note: Make sure you have a way to deal with overlay area codes (Eg 778xxxxxxx in Vancouver)

After you create and save your new plans, use the test field at the bottom of the Plan list to test that the dial plan catches the patterns and returns the desired outcome.

In some cases the order of the dial plan entries is critical.

bahmak2003 · 10-04-2007, 10:51 PM

thank you kurun you solved my problem for two weeks! Your replacement tip is what I need for phonegnome to work on my voxalat and mysipswitch dialpaln.

calebsg · 10-07-2007, 03:22 AM

Thanks, kurun, for taking the time to help me on this.
Caleb

evilbunny · 10-09-2007, 03:54 AM

What's the benefit in making an explict route like this compared to just getting results from enum, since 18(00|66|77|88) routes are all listed in e164.org?

kurun · 10-11-2007, 04:27 AM

Thanks for pointing this out.
From looking at the Voxalot FAQ, it is not immediately obvious that ENUM Lookup set to Yes in the Dial Plan will handle 1800/866/877/888 numbers or which countries' toll free numbers are accessible.

Probably an update about this in the Voxalot FAQ/Wiki would be the quite helpful.

evilbunny · 10-11-2007, 04:21 PM

There is quiet a few (not sure how many currently off hand) toll free ranges for various countries, the above only covers the US, enum covers a lot more.

09-30-2007, 07:18 AM	#1
calebsg Junior Member Join Date: Sep 2007 Location: Vancouver, BC Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	1800 smart call and prefixing Hi, I'm a noobie to this. Can someone help me with: How to set up a smart call rule that will automatically convert a dialed (NA) toll free (e.g., 1-800/1-888 etc) to 1800 etc? set up smart call rule to prepend 1604 to 7 digit numbers? Thanks for your help, Caleb

09-30-2007, 07:56 AM	#2
kurun Join Date: Sep 2006 Location: Toronto, Canada Posts: 568 Thanks: 70 Thanked 147 Times in 115 Posts	Smart call (Dial Plan) for 1800 numbers and 7 digit dialing Go to Smart Call (Dial plan), click Add and go to Advanced mode, and enter Pattern _1800xxxxxxx or _1800. [Note that the "." is part of the statement] Replacement *${EXTEN} Provider Sip Broker Active Yes Virtual Toll Free, Enum Look Up, Geographic Look Up set to No (You may want to experiment with these once you get the basic plan working) Repeat the above for 1866, 1888 etc. For the 7 digit numbers, try the following: Pattern _Zxxxxxx Replacement 1604${EXTEN} Provider Voip_Service_Provider Active Yes Virtual Toll Free, Enum Look Up, Geographic Look Up set to No (Again experiment later) Note: Make sure you have a way to deal with overlay area codes (Eg 778xxxxxxx in Vancouver) After you create and save your new plans, use the test field at the bottom of the Plan list to test that the dial plan catches the patterns and returns the desired outcome. In some cases the order of the dial plan entries is critical.

10-04-2007, 10:51 PM	#3
bahmak2003 Junior Member Join Date: Oct 2007 Posts: 1 Thanks: 1 Thanked 1 Times in 1 Posts	a BIG thanks! thank you kurun you solved my problem for two weeks! Your replacement tip is what I need for phonegnome to work on my voxalat and mysipswitch dialpaln.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM

10-07-2007, 03:22 AM	#4
calebsg Junior Member Join Date: Sep 2007 Location: Vancouver, BC Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks, kurun, for taking the time to help me on this. Caleb

10-09-2007, 03:54 AM	#5
evilbunny Senior Member Join Date: Feb 2006 Posts: 176 Thanks: 0 Thanked 14 Times in 10 Posts	What's the benefit in making an explict route like this compared to just getting results from enum, since 18(00\|66\|77\|88) routes are all listed in e164.org?

10-11-2007, 04:27 AM	#6
kurun Join Date: Sep 2006 Location: Toronto, Canada Posts: 568 Thanks: 70 Thanked 147 Times in 115 Posts	Thanks for pointing this out. From looking at the Voxalot FAQ, it is not immediately obvious that ENUM Lookup set to Yes in the Dial Plan will handle 1800/866/877/888 numbers or which countries' toll free numbers are accessible. Probably an update about this in the Voxalot FAQ/Wiki would be the quite helpful.

10-11-2007, 04:21 PM	#7
evilbunny Senior Member Join Date: Feb 2006 Posts: 176 Thanks: 0 Thanked 14 Times in 10 Posts	There is quiet a few (not sure how many currently off hand) toll free ranges for various countries, the above only covers the US, enum covers a lot more.