Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 06-03-2008, 04:14 AM   #1
richard
Senior Member
 
Join Date: Mar 2006
Posts: 153
Thanks: 37
Thanked 7 Times in 7 Posts
richard is on a distinguished road
Default SPA1001 Appears to be registering every 1 second

Hi All

I just setup a SPA1001 for a friend and for some reason it appears to be registering every 1 second.

The Next Registration In shows only blank, 1 s or 0 s.

I have the Register Expires set to 3600, but previously I had it at 600 and 1800 and the ATA still appears to always show the next registration after blank, 0 or 1 sec.

--------------------------
Next Registration In: 1 s
Register Expires: 3600

--------------------------

Is the Register Expires parameter the field that controls the registration period?

Does anyone know how I can fix this problem?

Thanks in advance


Richard
richard is offline   Reply With Quote
Unread 06-03-2008, 07:00 AM   #2
richard99
Senior Member
 
Join Date: Feb 2007
Location: Indiana, USA
Posts: 166
Thanks: 14
Thanked 22 Times in 19 Posts
richard99 is on a distinguished road
Default

yes, Register Expires parameter the field that controls the registration period. For Voxalot the recommended value is 600 sec.
richard99 is offline   Reply With Quote
Unread 06-03-2008, 11:15 AM   #3
richard
Senior Member
 
Join Date: Mar 2006
Posts: 153
Thanks: 37
Thanked 7 Times in 7 Posts
richard is on a distinguished road
Default

Okay, this is weird now. I left it set at 3600 overnight (7 hours) and when I work up this morning, it was doing as it should. Taking 3600 seconds between registratino expire. I then changed the setting back to 600 and now it is expiring every 1 second again.

Not sure what it will show in a few hours. I'll let everyone know.

Richard
richard is offline   Reply With Quote
Unread 06-05-2008, 12:55 PM   #4
richard
Senior Member
 
Join Date: Mar 2006
Posts: 153
Thanks: 37
Thanked 7 Times in 7 Posts
richard is on a distinguished road
Default

Okay, so now that I set it to 3600 seconds, it took 2 days (two overnights) before it starting to expire every 3600 seconds. For 2 days it was expiring every 1 sec. Anyhow knows why this unusual behaviour?
richard is offline   Reply With Quote
Unread 06-09-2008, 01:49 AM   #5
ridouan
Junior Member
 
Join Date: May 2008
Location: Netherlands
Posts: 8
Thanks: 1
Thanked 2 Times in 1 Posts
ridouan is on a distinguished road
Default

I had the same problem with my SPA-3102. Whenever I enable the options

- Handle VIA received
- Insert VIA received
- Handle VIA rport
- Insert VIA rport

as some posts on the net suggest, I get the exact same behaviour. I did read somewhere this was due to the fact I'm also using a STUN server and that if 'STUN test' was set to yes the 1sec registration issue would go away.
Unfortunately that didn't happen, so I just the turned off the above options and enabled "Substitute VIA Addr", "Send Resp To Src Port" and "STUN Enable". That seems to do the trick and works without a hitch.
ridouan is offline   Reply With Quote
Unread 06-09-2008, 12:13 PM   #6
ozimarco
Senior Member
 
Join Date: May 2006
Location: Lower Chittering, about an hour from Perth, Western Australia
Posts: 229
Thanks: 61
Thanked 42 Times in 28 Posts
ozimarco is on a distinguished road
Send a message via Skype™ to ozimarco
Default

Quote:
Originally Posted by ridouan View Post
Unfortunately that didn't happen, so I just the turned off the above options and enabled "Substitute VIA Addr", "Send Resp To Src Port" and "STUN Enable". That seems to do the trick and works without a hitch.
Those are my settings, too, in my PAP2. Working very well.
__________________
ISP: Internode Easy Reach 60: 60GB for AUD60
VSPs: Pennytel and others via SIPSorcery
Hardware:
Billion 7800VDPX + Siemens Gigaset A580IP and Yealink T22P.
ozimarco is offline   Reply With Quote
Unread 06-10-2008, 02:29 AM   #7
richard
Senior Member
 
Join Date: Mar 2006
Posts: 153
Thanks: 37
Thanked 7 Times in 7 Posts
richard is on a distinguished road
Default

Ridouan

It worked. The registration seconds now reflect what it should be. Unfortunately, now I have one-way audio, but its a start.

This does help me to understand the problem a bit better, so thanks!!!

Richard

Quote:
Originally Posted by ridouan View Post
I had the same problem with my SPA-3102. Whenever I enable the options

- Handle VIA received
- Insert VIA received
- Handle VIA rport
- Insert VIA rport

as some posts on the net suggest, I get the exact same behaviour. I did read somewhere this was due to the fact I'm also using a STUN server and that if 'STUN test' was set to yes the 1sec registration issue would go away.
Unfortunately that didn't happen, so I just the turned off the above options and enabled "Substitute VIA Addr", "Send Resp To Src Port" and "STUN Enable". That seems to do the trick and works without a hitch.

Last edited by richard; 06-10-2008 at 02:42 AM.
richard is offline   Reply With Quote
Unread 06-10-2008, 02:48 PM   #8
ridouan
Junior Member
 
Join Date: May 2008
Location: Netherlands
Posts: 8
Thanks: 1
Thanked 2 Times in 1 Posts
ridouan is on a distinguished road
Default

I'm glad you got it working (partially) !

WRT to one-way audio, do you have 'NAT Mapping Enable' and 'NAT Keep Alive Enable' set to 'Yes'? (Found on the Line 1 tab).

If you have an ADSL modem in router (NAT) mode, you could also have a look to see whether the SIP ALG is enabled on your ADSL modem. It seems that a lot of modems have a crappy implementation that screws up SIP instead of fixing it.
ridouan is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Voxalot line2 on SPA1001 suddenly dead... miros Voxalot Support 2 04-02-2008 11:45 PM
Problem registering with Billion 7402VGP nirving Voxalot Support 5 11-29-2007 10:41 PM
Anyone experiencing problems registering in eu server? ricardojpereira Voxalot Support 1 05-10-2007 07:35 AM
Second Port not registering? MarkLL Voxalot Support 4 09-17-2006 09:58 AM
Problems registering with Skypho (voip.eutelia.it) MrFusion Voxalot Support 1 09-14-2006 08:51 AM


All times are GMT. The time now is 10:45 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.