Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Tips, Tricks & HowTo's

Voxalot Tips, Tricks & HowTo's Tips and Tricks for Voxalot

 
 
Reply
Thread Tools Display Modes
Unread 04-29-2008, 11:47 PM   #11
asim
Junior Member
 
Join Date: Apr 2008
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
asim is on a distinguished road
Default x-lite, call disconnect after 20 seconds when using other port 80

i am an area where default port 5060 is blocked so i have used the outbound proxy and port 80 for registration with voxalot it registers properly but after 20 seconds of call it disconnects with x-lite i and also i am not able to receieve incoming call. if any one can help i will be thankful
asim is offline   Reply With Quote
Unread 04-30-2008, 12:50 AM   #12
pedroz
Junior Member
 
Join Date: Apr 2008
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
pedroz is on a distinguished road
Default

same...

in outgoing calls.
pedroz is offline   Reply With Quote
Unread 05-26-2008, 07:51 PM   #13
emankh101
Junior Member
 
Join Date: May 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
emankh101 is on a distinguished road
Unhappy x-lite

hi
i can't receive any call on x-lite at pc.
but i can receive call on fring at my mobile.
pleas help me.
i change port x-lite too.
but i can't receive call too.
pleas help.
emankh101 is offline   Reply With Quote
Unread 06-25-2008, 07:49 AM   #14
than30fyl
Junior Member
 
Join Date: Apr 2008
Location: Thessaloniki
Posts: 8
Thanks: 0
Thanked 1 Time in 1 Post
than30fyl is on a distinguished road
Send a message via Yahoo to than30fyl
Default outgoing calls get disconnected in 21 seconds...

Hi,

Voxalot is a great service. Recently i came across a strange problem. All my outgoing calls get disconnected when going through voxalot, no matter which is the destination SIP provider.

I am using a Fritz. 7140 ATA and this is a simple setup. When i am able to use port 5060 for SIP everything works as expected (I've tested this thoroughly).

However, my internet / telephony provider is using port 5060 so it's practically blocked for my SIP providers. I am using Voxalot as a Gateway on different port (2060) and registers fine. Incoming calls get connected well. Outgoing calls work, Voxalot Dialing plan works, but no matter to which provider i get connected through the call drops in exactly 21 seconds...

Any suggestions are highly appreciated.
Best Regards,
~thanasis
than30fyl is offline   Reply With Quote
Unread 06-25-2008, 01:14 PM   #15
emoci
 
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123
Thanked 368 Times in 281 Posts
emoci is a name known to allemoci is a name known to allemoci is a name known to allemoci is a name known to all
Default

Try using 80 or 443 and see if anything changes

Also, if the provider you are using has been set with Optimize Audio to Yes, set this to No and see if that helps...

I suspect that when calling out, especially if Optimize Audio is set to Yes, the SIP ReInvite is using 5060...hence your issues
emoci is offline   Reply With Quote
Unread 06-26-2008, 04:31 PM   #16
than30fyl
Junior Member
 
Join Date: Apr 2008
Location: Thessaloniki
Posts: 8
Thanks: 0
Thanked 1 Time in 1 Post
than30fyl is on a distinguished road
Send a message via Yahoo to than30fyl
Default

Dear emoci,

Thank you for your help.

I've tried ports 80 and 443 and give the same as 2060.

Optimize Audio Path is set to NO
NAT Handling is set to YES.

I get a connection to any provider i have available in my voxalot account, (through my dialing plans), the connection operates flawlessly for 21 seconds and then sudenly disconnects!

I see other users referring to this in previous posts in this same thread.

Any help is apreciated.
Best Regards,
~thanasis.
than30fyl is offline   Reply With Quote
Unread 06-26-2008, 07:23 PM   #17
emoci
 
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123
Thanked 368 Times in 281 Posts
emoci is a name known to allemoci is a name known to allemoci is a name known to allemoci is a name known to all
Default

Quote:
Originally Posted by than30fyl View Post
Dear emoci,

Thank you for your help.

I've tried ports 80 and 443 and give the same as 2060.

Optimize Audio Path is set to NO
NAT Handling is set to YES.

I get a connection to any provider i have available in my voxalot account, (through my dialing plans), the connection operates flawlessly for 21 seconds and then sudenly disconnects!

I see other users referring to this in previous posts in this same thread.

Any help is apreciated.
Best Regards,
~thanasis.

Ok, how about NAT routing, especially STUN setup:

I am not familiar with the Fritzbox but here is a few things to consider: http://forum.voxalot.com/voxalot-sup...html#post14452
emoci is offline   Reply With Quote
Unread 07-03-2008, 01:29 PM   #18
than30fyl
Junior Member
 
Join Date: Apr 2008
Location: Thessaloniki
Posts: 8
Thanks: 0
Thanked 1 Time in 1 Post
than30fyl is on a distinguished road
Send a message via Yahoo to than30fyl
Default

Dear emoci,

Thanks for all the info.

I've purchased a Linksys/Sipura SPA3102 to replace my fritz.box 7140. I have one provider registed with Line1 and Voxalot as my Gateway1. The ports used are 2060. Everything is working as expected, except for the disconnect after 20 seconds, that voxalot connections - suffer.

I've setup the STUN: stun.xten.com, and NAT keep alive on my accounts. Also i have forward ports:
2060 UDP and (RTP) 16384-16482 UDP to my SPA3102 adapter.

I've also followed the aritcle metioned in the previous reply.

Still Voxalot will disconnect after exactly 20 seconds.

Any ideas please?

~thanasis
than30fyl is offline   Reply With Quote
Unread 07-03-2008, 02:12 PM   #19
emoci
 
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123
Thanked 368 Times in 281 Posts
emoci is a name known to allemoci is a name known to allemoci is a name known to allemoci is a name known to all
Default

Quote:
Originally Posted by than30fyl View Post
Dear emoci,

Thanks for all the info.

I've purchased a Linksys/Sipura SPA3102 to replace my fritz.box 7140. I have one provider registed with Line1 and Voxalot as my Gateway1. The ports used are 2060. Everything is working as expected, except for the disconnect after 20 seconds, that voxalot connections - suffer.

I've setup the STUN: stun.xten.com, and NAT keep alive on my accounts. Also i have forward ports:
2060 UDP and (RTP) 16384-16482 UDP to my SPA3102 adapter.

I've also followed the aritcle metioned in the previous reply.

Still Voxalot will disconnect after exactly 20 seconds.

Any ideas please?

~thanasis

-Open and forward the following ports to the ATA:

5050-5064 Both TCP/UDP
5000-5005 Both TCP/UDP
16300-16500 Both TCP/UDP
2060 Both TCP/UDP

-Under 'NAT Support Parameters heading' try these:

Handle VIA received: Yes
Handle VIA rport: Yes
Insert VIA received: Yes
Insert VIA rport: Yes
Substitute VIA Addr: No
Send Resp To Src Port: No
STUN Enable: Yes
STUN Test Enable: No
STUN Server: stun.xten.com
EXT IP: (blank)
EXT RTP Port Min: (blank)
NAT Keep Alive Intvl: 20 (or 30)

or

Handle VIA received: No
Handle VIA rport: No
Insert VIA received: No
Insert VIA rport: No
Substitute VIA Addr: Yes
Send Resp To Src Port: Yes
STUN Enable: Yes
STUN Test Enable: No
STUN Server: stun.xten.com
EXT IP: (blank)
EXT RTP Port Min: (blank)
NAT Keep Alive Intvl: 20 (or 30)


-Also in your VoXalot acct. try the following combinations:

NAT Symmetric Handling: NO
Optimize Audio: Yes

or

NAT Symmetric Handling: NO
Optimize Audio: NO

or

NAT Symmetric Handling: Yes
Optimize Audio: NO


-Make sure that 'NAT Keep Alive', and 'NAT Mapping Enable' are both set to Yes in the SPA
emoci is offline   Reply With Quote
Unread 07-04-2008, 06:31 PM   #20
wildvoip
Junior Member
 
Join Date: Jan 2007
Posts: 10
Thanks: 0
Thanked 1 Time in 1 Post
wildvoip is on a distinguished road
Default

I have NAT keep alive and NAT mapping on the PAP2 set. When I register to us.voxalot.com:2060, 80, 443 i.e. anything besides 5060 I see that

When I call another voxalot user who is offline (not registered) then the call does not go to his voicemail. I just get no response. I am able to call the user when he is online (registered) and reach his voicemail.

What is the problem here ?

Thank you.
wildvoip is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HowTo: 6 Steps To Tune Your Voice Quality martin Voxalot Tips, Tricks & HowTo's 13 12-27-2010 11:36 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
Provider with Outbound Proxy? MrHatken Voxalot Support 14 03-07-2008 05:02 AM
incoming calls to my voxalot number without sound wycodreams Voxalot General 22 10-04-2007 05:35 PM


All times are GMT. The time now is 08:50 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.