![]() |
![]() |
#1 |
Junior Member
Join Date: May 2010
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() I cannot get the speed dials to work.
I dial "1" on the PAP2 attached, and I get: "We're sorry, the number you have called could not be connected." I noticed that the system requires the "sip:" to be placed at the beginning of the URI, and will not simply take the sip alone, so I did so, and still nothing... ![]() How do I get it to work? ![]() |
![]() |
![]() |
![]() |
#2 | |
![]() ![]() Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123 Thanked 369 Times in 282 Posts ![]() ![]() ![]() ![]() |
![]() Quote:
To dial Speed Dials defined in VoXalot from your PAP2 you need to enter: **1 to dial Speed Dial 1 To dial Speed Dials defined in your PAP2 (under the USER TAB) you need to dial: 1# for Speed Dial 1 on the PAP2 |
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: May 2010
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Nothing goes thru when I dial ** anything. I get a fast busy trying to dial in this manner.
H-E-L-P!!! ![]() |
![]() |
![]() |
![]() |
#4 |
![]() ![]() Join Date: Feb 2006
Posts: 447
Thanks: 4 Thanked 8 Times in 8 Posts ![]() |
![]() |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: May 2010
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Here is the dial plan --- what are you speaking about?
![]() (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) |
![]() |
![]() |
![]() |
#6 | |
Senior Member
![]() Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7 Thanked 26 Times in 21 Posts ![]() |
![]() Quote:
(*[*].|[3469]11|00x.|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxx.) With this dial plan: a) All sequences that begins with one '*' and that are followed by any number or star, with any length, matches '*[*].' rule; b) 311, 411, 611 and 911 matches '[3469]11' rule; c) To dial international calls you dial 00 followed by country+city+phone. If you prefer to dial '011' instead '00' for international calls, you can change the above rule to '011x.'; d) To dial US local number, it matches '[2-9]xxxxxx' rule. You should remember that this sipura dial plan doesn't change the dialed number, so your VSP or Voxalot must be configured to manage such number (international VSP normally obliges you to dial in e164 format, that is, country+city+phone); e) To dial US long distance numbers (including 1800 and similar numbers), they matches '1xxx[2-9]xxxxxxS0' rule. Remember that 'S0' means immediate dial; f) The final rule accepts any sequence of numbers that have at least eight numbers in length and that doesn't begin with '1' (that is because 'S0' on the precedent rule). Unless you have some specific use for this rule, it can be eliminated. Sipura manuals are clear on configuration examples that you should read. Another thing is your Voxalot dial plan. Regards, |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() |
![]() The only dial plan I have in my PAP2 is [x*][x*]. (including the dot). This allows me to dial speed dial numbers **1, etc. All other dial plans are configured within Voxalot itself.
__________________
ISP: Internode Easy Reach 60: 60GB for AUD60 VSPs: Pennytel and others via SIPSorcery Hardware: Billion 7800VDPX + Siemens Gigaset A580IP and Yealink T22P. |
![]() |
![]() |
![]() |
#8 |
![]() ![]() Join Date: Feb 2006
Posts: 447
Thanks: 4 Thanked 8 Times in 8 Posts ![]() |
![]() FWIW, I agree with ozimarco that it's best to simply pass everything (digits and *'s) through the PAP2 unaltered and do all validation and routing in the Voxalot dial plan. It may cost you a couple of extra entries in the Voxalot dial plan, but in the end it's simpler and clearer and more manageable.
|
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Jul 2010
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() I can't get mine working either.
I'm using an iPhone (with no dial plan) direct to Voxalot. I have set up the speed dial to **5 to dial sip(colon)persons-name@77.72.169.134 and I get Call Failed - 'Internal Server Error - 500' |
![]() |
![]() |
![]() |
#10 | |
Junior Member
Join Date: Jul 2010
Posts: 4
Thanks: 0 Thanked 0 Times in 0 Posts ![]() |
![]() Quote:
But all I get is "We're sorry, the number you have called could not be connected." If I test the rule, I get; 'A call to:01XXXXXX239 will get forwarded to Bryan-Adams@77.72.169.134 via Voipstunt Which appears OK, but doesnt work. (I have also tried sip:Bryan-Adams@77.72.169.134 to no avail) Last edited by pauldreed; 07-20-2010 at 09:01 AM. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Feature Request - Alternative Pre-Fix for SIPBroker & Speed Dials | Lanh | Voxalot Support | 6 | 07-23-2008 09:38 PM |
Problems accessing Voxalot Speed Dial | Jay | Voxalot Support | 10 | 11-26-2007 09:08 AM |
how to make speed dials without using speed dials | pranzo | Voxalot Support | 0 | 03-06-2007 02:04 AM |
Import / export speed dials | tomblandford | Voxalot Support | 1 | 03-01-2007 04:30 PM |
using speed dials on voxalot.com.au | mewnz | Voxalot Support | 3 | 05-31-2006 09:19 PM |