10-16-2007, 06:45 AM | #1 |
Junior Member
Join Date: Oct 2007
Posts: 2
Thanks: 2 Thanked 1 Times in 1 Posts |
FWD and Voxalot
Hi,
I've been trying to use FWD (FreeWorldDialup) with Voxalot and although I have spent several hours, I'm still unable to get it working. The way I would like to have my configuration is having IPKall forwarding to FWD and then use Voxalot to forward any incoming calls to my SIP phone (I will later register another provider to Voxalot for the outgoing calls). Having the FWD settings on my ATA, I can call the IPKall number and the phone will ring. Having the Voxalot settings on the ATA and calling one of the SIPBroker Access Numbers again the phone will ring. Echo test also works. However, if I try to call my IPKall number having the Voxalot settings at the ATA, I get a busy tone and the phone does not ring. I don't think it is a problem of the configuration. Below are my provider settings in Voxalot for FWD: Provider Name: FWD Username: 6-digit FWD number Codecs: ulaw;alaw Host: fwd.pulver.com Port: 5061 (I'm using the same port at the ATA) Active: Yes SIP register: No Optimize Audio Path: Yes Any help would be greatly appreciated. Thanks. |
10-16-2007, 02:11 PM | #2 |
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Thanks: 70 Thanked 147 Times in 115 Posts |
To receive incoming calls from FWD, your SIP register must be set to "Yes".
Alternately, you can set up your FWD account to "forward" all incoming calls to your Voxalot account [xxxxxx@voxalot.com], since FWD allows that. SIP Register set to no enables you to make outgoing calls from Voxalot. Typically, you would set up a VSP for outgoing calls only with SIP Register set to No. Last edited by kurun; 10-16-2007 at 02:13 PM. |
10-16-2007, 11:50 PM | #3 |
Join Date: Apr 2006
Posts: 799
Thanks: 66 Thanked 61 Times in 44 Posts |
There is no good reason to setup FWD with SIP Register set to yes. The forwarding that FWD does is all that you need to receive incoming calls. Outgoing calls using FWD work fine without SIP registration.
|
10-17-2007, 07:33 AM | #4 |
Junior Member
Join Date: Oct 2007
Posts: 2
Thanks: 2 Thanked 1 Times in 1 Posts |
Thank you both kurun and affinity. It did work this way. Just as a reference to future users, the forward URI you need to set at FWD should look like:
sip:xxxxxx@us.voxalot.com (or eu.voxalot.com, or au.voxalot.com depending on where you live). |
10-17-2007, 08:01 AM | #5 | |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
Quote:
.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
|