Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 09-22-2006, 02:23 AM   #1
usf
Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 30
Thanks: 3
Thanked 1 Times in 1 Posts
usf is on a distinguished road
Default sip register select "yes" ? while add provider

After login voxalot, go to add voip provider to provider menu.
In the last step, there is a choice " yes/no " in sip register. Its default is "no".

In what condition, I should select "yes" ? there is no explain in tution.
Any member knows that.
usf is offline   Reply With Quote
Unread 09-22-2006, 02:52 AM   #2
martin
 
Join Date: Feb 2006
Posts: 2,930
Thanks: 528
Thanked 646 Times in 340 Posts
martin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the rough
Default

Hello,

You only need to set this field to "yes" if you want to receive inbound calls via this provider or if the provider requires you to be registered to make calls.

At the moment changing this field can take up to 24 hours to take effect. The good news is our new registration function (to be released very soon) is looking good and registrations will soon be back to 5 mins.
__________________
Martin

Please post support questions on the forum. Do not send PMs unless requested.
martin is offline   Reply With Quote
Unread 09-22-2006, 02:55 AM   #3
Ron
 
Join Date: Feb 2006
Posts: 447
Thanks: 4
Thanked 8 Times in 8 Posts
Ron will become famous soon enough
Default

If your VoIP provider supports incoming calls, you will need to set SIP Register = Yes.

Some VoIP providers require a sip registration to make outgoing calls. If yours does, you will need to set SIP Register = Yes.

Changes to this setting may take up to 24 hours to occur.

Ron
Ron is offline   Reply With Quote
Unread 09-22-2006, 06:17 AM   #4
usf
Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 30
Thanks: 3
Thanked 1 Times in 1 Posts
usf is on a distinguished road
Default

helping reply.

Martin, Ron
Thanks
usf is offline   Reply With Quote
Unread 09-23-2006, 10:48 AM   #5
usf
Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 30
Thanks: 3
Thanked 1 Times in 1 Posts
usf is on a distinguished road
Default

I register stanaphone with sip register with yes. after a few hour later, I check its status and it shows yes.
I set up voxalot in ATA. ATA can receive stanaphone ring tone . But I pick up the phone's handset, I cannot talk and receive voice.

also , I register with freedigits with sip register with yes, but sip register does not work.
freedigts need stun or outbound proxy setting. I do not see voxalot provide this type of setting. Does it cause freedigit not working ?
any member add stanaphone and freedigits with sip register "yes" in provider menu before and what is your result, work or not?
please comments.
usf is offline   Reply With Quote
Unread 09-23-2006, 11:46 AM   #6
Ron
 
Join Date: Feb 2006
Posts: 447
Thanks: 4
Thanked 8 Times in 8 Posts
Ron will become famous soon enough
Default

I use both Stanaphone and FreeDigits through VoXaLot and seldom have any problems.

Your audio problems with Stanaphone are likely related to NAT issues with your router. You can confirm this by temporarily connecting your ATA directly to your Cable/DSL modem. If the problem goes away, you will know it's your router. I have to forward the appropriate SIP and RTP ports to my PAP2 as well as use a STUN server for 100% reliable audio.

FreeDigits does not need an outbound proxy server. I use proxy.freedigits.net as the Host in my Provider entry.

Ron
Ron is offline   Reply With Quote
Unread 09-24-2006, 12:44 AM   #7
usf
Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 30
Thanks: 3
Thanked 1 Times in 1 Posts
usf is on a distinguished road
Default

Thanks Ron.
I have more question.
for use in inbound call only, besides add my Voip provider in provider menu.
Need I add any more setting?
e.g Need I add any dial plan in dial plan menu or not ? or
need I press any button in phone set before I pick up the handset to talk?
usf is offline   Reply With Quote
Unread 09-24-2006, 01:01 AM   #8
Ron
 
Join Date: Feb 2006
Posts: 447
Thanks: 4
Thanked 8 Times in 8 Posts
Ron will become famous soon enough
Default

Inbound calls should require nothing more than a successful SIP registration on the Providers page.

Dial Plans are used for outbound calling only.

An incoming call should ring the telephone in the normal manner and simply picking up the receiver should establish the call.

Ron
Ron is offline   Reply With Quote
Unread 09-24-2006, 01:15 AM   #9
usf
Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 30
Thanks: 3
Thanked 1 Times in 1 Posts
usf is on a distinguished road
Default

Ron ,
Thanks
need I set up stun server setting in ATA for voxalot.com for inbound call?
usf is offline   Reply With Quote
Unread 09-24-2006, 02:37 AM   #10
Ron
 
Join Date: Feb 2006
Posts: 447
Thanks: 4
Thanked 8 Times in 8 Posts
Ron will become famous soon enough
Default

Quote:
Originally Posted by usf
need I set up stun server setting in ATA for voxalot.com for inbound call?
It generally depends on the particular router and ATA. Some people get away without any ports forwarded in their router and without the need to use a STUN server. Others have audio problems unless they use one or the other. In my case, I seem to need both to keep Stanaphone happy.

It's probably best to sneak up on it. See how you do without any special measures. If it works fine, enjoy it. If you have audio problems, try bypassing your router temporarily to see if it's a router issue. If it is, see if a STUN server will correct the problem. If it doesn't, try forwarding the appropriate SIP/RTP ports in your router.

Ron
Ron is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
Can not register to provider??? Solution! wilsonhlacerda Voxalot Support 2 04-29-2007 04:22 AM
Using same provider in two Voxalot accounts clundestad Voxalot Support 1 04-20-2007 11:32 AM
Cannot Register Provider mrocha Voxalot Support 13 03-29-2007 06:05 AM
Problem to register my new provider Cheapnet lunico Voxalot Support 1 10-11-2006 02:26 PM


All times are GMT. The time now is 01:22 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.