|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
12-28-2008, 09:23 AM | #41 | |
Junior Member
Join Date: Feb 2008
Location: The Netherlands
Posts: 16
Thanks: 0 Thanked 2 Times in 2 Posts |
Quote:
From voipbuster I've dialed the inum numbers of several voxalot members and all worked perfectly. I've sent you a Personal Message, please reply. Regards, zonljmv |
|
12-28-2008, 07:45 PM | #42 | |
Member
Join Date: Jul 2008
Posts: 46
Thanks: 30 Thanked 12 Times in 11 Posts |
Hi,
I call some iNum numbers via Poivy. It works fine. I change provider to Gizmo5 and it works to. My settings in Dial Plan: Quote:
+883510074022302 SIP Broker access +883510000000091 Echo Test +883510004213xxx My own Regards Józef |
|
12-29-2008, 12:14 PM | #43 |
Senior Member
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7 Thanked 26 Times in 21 Posts |
Providers -- iNum
As far as I know, providers that are routing calls to iNum numbers:
* Voxalot * Voip User * Gizmo * Voipbuster * Skype I've tried all of them and they are working. with no problems. |
12-30-2008, 05:34 AM | #44 |
Senior Member
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17 Thanked 77 Times in 64 Posts |
What digits did you send to Voxalot when calling the inum echo test number? What is shown when you test the inum echo test number in the Dial Plan Test of your Voxalot account?
Last edited by boatman; 12-30-2008 at 05:49 AM. |
12-30-2008, 05:18 PM | #45 |
Senior Member
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7 Thanked 26 Times in 21 Posts |
Voxalot has a default dial plan rule, with the lowest possible priority, which resolves all dialled numbers through ENUM or any other known free route (this actually includes the iNum route through Voxalot). All numbers dialled as country+number are resolved through this rule, except if exists an higher priority rule (set by the Voxalot user in the Smart Call configuration) that sends this call through another configured Voice Service Provider.
So, if you dial: a) 882 9993 xxxxxx (where xxxxxx is a Voxalot number) the call is resolved through ENUM to the desired Voxalot user; b) 1 8000 xxx xxxx (where xxx xxxx is an US Toll Free number) the call is resolved through ENUM to a toll free number in the US; b) 883 5100 xxxxxxxx (where xxxxxxxx is the rest of the desired iNum) the call is resolved to an iNum call. If you want to try the iNum echo test, you can dial from Voxalot: 883 5100 00000091 (with no leading 00!). However, it's not yet possible to call an iNum stored in the Speed Dial list through Voxalot. This is a «bug» in the system, which should be shortly resolved. But if you want to store in the Speed Dial list an iNum number, you can configure a dial rule to send this number through one of the Voip Operators that actually opened their net to iNum. For example, I have configured, in my dial plan (Smart Call), a rule to send all numbers in the format 00883 5100 xxxxxxxx through Voip User. Actually, this rule should have an higher priority than any other rule that sends all 00x. numbers to another Voip operator if it doesn't support calling to iNum numbers. I hope to have fully answered your question. Yours, Last edited by carlosalbffgomes; 12-30-2008 at 05:21 PM. |
12-30-2008, 05:57 PM | #46 |
Senior Member
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17 Thanked 77 Times in 64 Posts |
That's how I thought it would work, however I dial 883510000000091 and get only a recorded error message (we're sorry, the number you have called could not be connected), not the inum echo test. My only dial plan is the default Voxalot dial plan:
Code:
# Pattern Replacement Provider Active 999 _xxxx. ${EXTEN} Voxalot Yes ENUM Lookup = Yes Geographic Lookup = No |
12-30-2008, 07:51 PM | #47 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
iNum calls don't actually use a dial plan entry. In fact for them to work properly, the 883 prefixed number must NOT match any dial plan entry.
Try disabling the default dial plan entry and get to a point where the "Test Call" feature displays something like: Code:
A call to:8835100xxxxxxxx will not get forwarded
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
12-30-2008, 08:44 PM | #48 |
Senior Member
Join Date: May 2008
Location: Portugal and Brazil
Posts: 107
Thanks: 7 Thanked 26 Times in 21 Posts |
The problem is the default dial plan, which you should delete it.
If you use your Voxalot account only to dial Voxalot and ENUM numbers, you don't need any dial plan at all. There is a «bug» in the system that prevents calls sent to Voxalot Provider to be able to dial an iNum number. So, in your case, to make it work you should delete this default entry in the dial plan and you will be able to dial as you have been able until now, plus iNum numbers. Yours, Last edited by carlosalbffgomes; 12-30-2008 at 08:47 PM. |
01-07-2009, 11:11 AM | #49 |
Junior Member
Join Date: Mar 2006
Posts: 3
Thanks: 0 Thanked 0 Times in 0 Posts |
Making Inum work - Work Trial Call - Busy Tones Only
Martin, I can successfully call the Inum access phone number in Tokyo and when dialing 883510004xxxxxx after prompt I am advised "connecting" by the prompt voice, but I just get busy tones shortly after this Wednesday early evening, January 7.
Is Voxalot presently fully set up to pass on these calls to my registered VSP or not? |
01-07-2009, 01:35 PM | #50 |
Senior Member
Join Date: Jul 2007
Posts: 143
Thanks: 13 Thanked 20 Times in 19 Posts |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough | ctylor | Voxalot General | 5 | 04-28-2010 12:52 AM |
New user problems with Call Connection Rules | bdlhome | Voxalot Support | 12 | 09-10-2008 02:19 AM |
VoXaLot Launches European Server | Tony | Voxalot Support | 28 | 02-07-2007 07:15 AM |
Newbie - but please be nice | Mallycat | Voxalot Support | 21 | 04-15-2006 07:50 AM |