What does it DO?

chrisc · 02-09-2006, 01:25 PM

I've just set up my X-Lite softphone for voxalot and got the echo test first time, congratulations on clear easy to use instructions. Not often you get to make the first posting either

But it's not clear from the home page or FAQ what benefits voxalot will provide its customers or how to use them. Maybe it could be more informative and do a better selling job at the same time.

I already have a sipgate.co.uk account and UK landline no. for incoming calls, I have also registered this no. with e164.org and set up a sipbroker a/c in a spirit of exploration. Now how do I combine all this to best effect??

TIA

chrisc
Cambridge, England

Admin · 02-11-2006, 03:48 AM

Hi Chris,

Documentation will come in the next few days.

--
Martin

Nikkodemus · 02-11-2006, 06:23 AM

Quote:

Originally Posted by chrisc

I've just set up my X-Lite softphone for voxalot and got the echo test first time,...

Well done! I tried to set up my Sipura 3000. As you say, clear instructions and I thought I followed them but 600 got zilch

Early days yet I guess - will await the documentation.

Admin · 02-11-2006, 09:10 PM

Hi Nikkodemus,

Please paste your dial plan here so we can take a look. Also what happens when you dial #1? Do you hear the second dial tone?

--
Martin

236267 · 02-12-2006, 08:13 PM

I have set up my Sipura 3000 using GW1 per the example.
I have pasted the example dial-plan.
When I dial the #1 I hear not a normal dial-tone but a higher,
continuous tone. The dialling 600 does nothing.
I am registered with an ITSP called "Voxee" recommended by
one of these VoIP websites, thinking that it would support enum
but perhaps it does not.

Suggestions welcome,

Thanks!

236267 · 02-12-2006, 09:47 PM

Well I checked the config again and it seems to be accurate.
Of course I just realised that it would not matter what the main
ITSP is doing since my GW1 should have registered with Voxalot.

Thanks,

Mike.

wildbill · 02-12-2006, 10:24 PM

I'm having the same problem myself - set up as per FAQ for SPA 3000 - dial #1 - 600 then nothing eventually get busy/na tone - my SPA monitor shows nothing about call either

martin · 02-13-2006, 12:29 AM

Hi Guys,

Can you please let me know what your internal IP address for the ATA is?

PM me if you like

--
Martin

melbournelees · 02-15-2006, 10:54 AM

For those interested, I didn't set it in a gateway. They are all used.

I set it in the dial plan like this:
<#9:>[x*][x*].<:@voxalot.com;usr=<tel_number>;pwd="<password>"; nat=yes>

Make sure your telephone number has no quotes and your password has quotes. For me I dial #9600 to get the echo test.

Edit: make sure that string is not longer than 64 characters. Change your password to a shorter one if it is.

wildbill · 02-17-2006, 06:29 AM

For interest I just tried Lee's dial plan addition and now can hear the echo test - one thing if you try it leave out the <> around your number and password otherwise do as he suggests

02-12-2006, 08:13 PM	#5
236267 Junior Member Join Date: Feb 2006 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	my first try not successful I have set up my Sipura 3000 using GW1 per the example. I have pasted the example dial-plan. When I dial the #1 I hear not a normal dial-tone but a higher, continuous tone. The dialling 600 does nothing. I am registered with an ITSP called "Voxee" recommended by one of these VoIP websites, thinking that it would support enum but perhaps it does not. Suggestions welcome, Thanks!

02-12-2006, 09:47 PM	#6
236267 Junior Member Join Date: Feb 2006 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	236267 - better known as Mike. Well I checked the config again and it seems to be accurate. Of course I just realised that it would not matter what the main ITSP is doing since my GW1 should have registered with Voxalot. Thanks, Mike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2006, 01:25 PM	#1
chrisc Junior Member Join Date: Feb 2006 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	What does it DO? I've just set up my X-Lite softphone for voxalot and got the echo test first time, congratulations on clear easy to use instructions. Not often you get to make the first posting either But it's not clear from the home page or FAQ what benefits voxalot will provide its customers or how to use them. Maybe it could be more informative and do a better selling job at the same time. I already have a sipgate.co.uk account and UK landline no. for incoming calls, I have also registered this no. with e164.org and set up a sipbroker a/c in a spirit of exploration. Now how do I combine all this to best effect?? TIA chrisc Cambridge, England Last edited by chrisc; 02-09-2006 at 01:28 PM.

02-11-2006, 03:48 AM	#2
Admin Administrator Join Date: Feb 2006 Posts: 21 Thanks: 5 Thanked 11 Times in 4 Posts	Hi Chris, Documentation will come in the next few days. -- Martin

02-11-2006, 09:10 PM	#4
Admin Administrator Join Date: Feb 2006 Posts: 21 Thanks: 5 Thanked 11 Times in 4 Posts	Hi Nikkodemus, Please paste your dial plan here so we can take a look. Also what happens when you dial #1? Do you hear the second dial tone? -- Martin

02-12-2006, 10:24 PM	#7
wildbill Senior Member Join Date: Feb 2006 Location: Cairns - Australia Posts: 117 Thanks: 1 Thanked 10 Times in 8 Posts	I'm having the same problem myself - set up as per FAQ for SPA 3000 - dial #1 - 600 then nothing eventually get busy/na tone - my SPA monitor shows nothing about call either

02-13-2006, 12:29 AM	#8
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Hi Guys, Can you please let me know what your internal IP address for the ATA is? PM me if you like -- Martin

02-15-2006, 10:54 AM	#9
melbournelees Member Join Date: Feb 2006 Posts: 49 Thanks: 2 Thanked 2 Times in 2 Posts	For those interested, I didn't set it in a gateway. They are all used. I set it in the dial plan like this: <#9:>[x][x].<:@voxalot.com;usr=<tel_number>;pwd="<password>"; nat=yes> Make sure your telephone number has no quotes and your password has quotes. For me I dial #9600 to get the echo test. Edit: make sure that string is not longer than 64 characters. Change your password to a shorter one if it is. __________________ Lee of Melbourne, Australia. Last edited by melbournelees; 02-15-2006 at 10:58 AM.

02-17-2006, 06:29 AM	#10
wildbill Senior Member Join Date: Feb 2006 Location: Cairns - Australia Posts: 117 Thanks: 1 Thanked 10 Times in 8 Posts	For interest I just tried Lee's dial plan addition and now can hear the echo test - one thing if you try it leave out the <> around your number and password otherwise do as he suggests