Provider with Outbound Proxy?

[MrHatken]

Hello All,

Do we use the Advanced > Host field for the Outbound Proxy if that is needed by our provider (and different from SIP Proxy)?

Is the Port field then the port for the Outbound Proxy (which may be different from 5060) or the SIP Proxy?

The description in the tutorial for adding a provider seems a bit "out-of-date" with regards to the fields presently in that form.

Finally, may I suggest the Host field maximum text size be increased, it seems quite small (although, of course, one could use an IP address).

Thanks,
Ashley.

[441516]

MrHatken, Try enabling stun on your ATA/Phone wich should work same as having outbound proxy.

[MrHatken]

Thank you for your post 441516,

Originally Posted by 441516

MrHatken, Try enabling stun on your ATA/Phone wich should work same as having outbound proxy.

Unfortunately, I don't think it is that easy. My ATA/Phone works fine with Voxalot and other providers through Voxalot except one that requires the specification of the provider's outbound proxy when registering.

I believe this is a limitation of the Voxalot provider registration, i.e. that it does not allow for these "special requirements" (e.g. outbound proxy) that some providers detail for their services.

I can register Voxalot with this provider but because of the lack of the outbound proxy I only get audio one way. If I register my ATA directly with this provider I can get audio both ways.

If I am wrong, though, someone please correct me.

Thanks again.

Cheers,
Ashley.

[martin]

MrHatken,

You are correct, there is no provision for an outbound proxy to be defined within VoXaLot.

We considered adding it to the "Advanced Setup" but decided to hold off on this change.

I will make a note to discuss with the rest of the team.

Thanks

[MrHatken]

Originally Posted by martin

MrHatken,
You are correct, there is no provision for an outbound proxy to be defined within VoXaLot.

Hello Martin,

Thank you for the confirmation of that point. I just wanted to be sure I wasn't missing something.

Thanks also for the great service - I hope something big comes out of it for the company.

Cheers,
Ashley.

[muzzza]

is this still the case - no out-bound proxy even in advanced mode?

what's the differance between 'from domain' & 'host' in the advanced setup?

M

[dmainou]

Originally Posted by martin

MrHatken,

You are correct, there is no provision for an outbound proxy to be defined within VoXaLot.

We considered adding it to the "Advanced Setup" but decided to hold off on this change.

I will make a note to discuss with the rest of the team.

Thanks

Martin,

Do you think the outbound capability will be added soon?

The cheapest, and only reasonable, provider back home has barriers in place like a different outbound proxy and different port (5061)... so you have to buy the ata or the softphone they sell.

I have all the details to connect myself just need the capability without letting them know...

Please help with this.

[martin]

Originally Posted by dmainou

Do you think the outbound capability will be added soon?

Within the next 2 months we plan to upgrade our telephony software. We will take a look at this request as part of these upgrades.

Please read your PMs