Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 02-23-2007, 01:25 AM   #1
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default Use of # in dial plan and registration

Is the use of the # now not possible? In one of the sticky note, a user have a dialplan which shows _#1xx. {EXTEN:2} which is what I have tried to emulate, however everytime the system would say, "the number dialled could not be completed", it seems only digits are now recognised as removing the # and {EXTEN:1} works OK. I just want conformation of my observation.

As a new user I would like also to ask whether I need 2 accounts to register 2 devices? I have an SMCWTVG ATA which is also a WIFI AP, and I have a Nokia E61 which uses the AP for access, can I set up both the E61 and the SMC device with the same Voxalot account and have them both registered? Seems like a silly request but I am only using the devices to dial out, receiving calls is not used at the moment thus having 2 separate device registrations does not seem imperative (the only reason i want to keep one account is just so that one dialplan can be used)
Tranworld is offline   Reply With Quote
Unread 02-23-2007, 04:12 AM   #2
affinity
 
Join Date: Apr 2006
Posts: 799
Thanks: 66
Thanked 61 Times in 44 Posts
affinity will become famous soon enough
Default

It could be that your ATA is not passing the #. Some ATA's work fine with 'special' characters like "*" and "#" and maybe even "+", others do not. Some ATA's use ""#" as a terminator to initiate the call.
affinity is offline   Reply With Quote
Unread 02-23-2007, 04:15 AM   #3
affinity
 
Join Date: Apr 2006
Posts: 799
Thanks: 66
Thanked 61 Times in 44 Posts
affinity will become famous soon enough
Default

Quote:
Originally Posted by Tranworld View Post
As a new user I would like also to ask whether I need 2 accounts to register 2 devices?
You can have more than one device registered with the same voxalot account. You cannot SIP register the same provider on multiple clusters though.

If you have multiple devices registered, you should probably use the same cluster for them all. All registered devices ring if there is an incoming call, so that could be good or bad as you see it.
affinity is offline   Reply With Quote
Unread 02-23-2007, 04:22 AM   #4
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default

I am using a SMCWTVG which does not use these at all (no dialplan), they just pass through, the problem is immediately where it hits the Voxalot then it seems to baulk, anyway since you think it should work, I will test again.

As far as multiple registration is concerned, that's perfect for my use

Thanks for the reply
Tranworld is offline   Reply With Quote
Unread 02-23-2007, 04:30 AM   #5
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default

Yep I've tested it both with the ATA and with the Nokia E61 and they both have the same response which is from Voxalot, in fact I searched Voxalot tutorial and it all seems to point to # and * not being used at all?
Tranworld is offline   Reply With Quote
Unread 02-23-2007, 04:51 AM   #6
affinity
 
Join Date: Apr 2006
Posts: 799
Thanks: 66
Thanked 61 Times in 44 Posts
affinity will become famous soon enough
Default

_#1. ${EXTEN:2} VoXaLot
_#1*x. ${EXTEN:2} VoXaLot
_#1**. ${EXTEN:2} VoXaLot

This isn't really a good example, but these three allow all calls via Voxalot such as:

#1853804 to sip:853804@voxalot.com
#1*600 to sip:*600@voxalot.com (voicemail)
#1**2 to sip:**2@voxalot.com (speed dial 2)

Of course these can all be done a little differently and directly:

*061853804
*600
**2
affinity is offline   Reply With Quote
Unread 02-23-2007, 05:13 AM   #7
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default

Could it be because of the #1, i.e. you use 2 digits whereas I only use 1?

#. ${EXTEN:1}
Tranworld is offline   Reply With Quote
Unread 02-23-2007, 05:18 AM   #8
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default

Yep I've checked it again, leaving everything the same, I simply add the # in front and modify ${EXTEN:2} and it said "we are sorry the number you've called cannot be connected"
Tranworld is offline   Reply With Quote
Unread 02-23-2007, 06:47 AM   #9
affinity
 
Join Date: Apr 2006
Posts: 799
Thanks: 66
Thanked 61 Times in 44 Posts
affinity will become famous soon enough
Default

The ${EXTEN:2}in my example, removes the #1 and passes everything else.
affinity is offline   Reply With Quote
Unread 02-23-2007, 07:19 AM   #10
Tranworld
Senior Member
 
Join Date: Feb 2007
Posts: 128
Thanks: 1
Thanked 5 Times in 4 Posts
Tranworld is on a distinguished road
Default

Yes I can understand the logic of EXTEN, I have this
_1xx. ${EXTEN:1} which mean the first digit is stripped out then the rest dialled, this worked when I dial 112345678 (it dials 12345678 of course). Then I modify it to be

_#1xx. ${EXTEN:2} then it doesn't work, it should simply strip out the 1st 2 digits and dial the string, but it doesn't ! (I dialled #112345678 of course)
Tranworld is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
Settings - Dial Plans, Registration Timeout and Netgear WGR615V rec9140 Voxalot Support 6 05-21-2007 09:01 AM
Outbound functionality without direct registration to Voxalot BJ_Abbott Voxalot Support 0 12-15-2006 04:10 PM
Help with PSTN registration. Hally Voxalot Support 0 12-12-2006 08:04 AM
dial plan help please muzzza Voxalot Support 0 09-01-2006 11:38 AM


All times are GMT. The time now is 06:37 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.