Voice Problems on Non Standard SIP ports - Page 2

emoci · 03-21-2009, 02:43 AM

First, in terms of setting up on non-standard ports take a look at Setting up Linksys PAP2 - Voxalot FAQ (there is a section about non-standard ports there that may help).

You should not need a specific Dial Plan rule for "VoXalot" as a provider.

Just to be safe, when under Smart Call/Dial Plans there is a test field where you can enter the number you're trying to call, and see if it will be properly routed with your current dial plan setup...

docknden1 · 03-21-2009, 12:40 PM

Hi Everyone

I have set the "NAT Keep Alive" Set to "YES" and the Interval set for "NAT Keep Alive Intvl:" is 30 as indicated in WIKI.

Coming to Dial Plan rules i have created one for my mom's account in order to reach her voxalot number,which i have successfuly tested so this dial plan rule should be delete or not. I am also using the NAT parameters(as per the WIKI Option1 for Nat Parameters) with the STUN server set to stun.voxalto.com:3478.

I have set my PAP2 exactly as per the WIKI.

Once again a big thanks to all of yor for helping me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HowTo: 6 Steps To Tune Your Voice Quality	martin	Voxalot Tips, Tricks & HowTo's	13	12-27-2010 11:36 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM
Can't get voice packets to bypass VoXaLot	v164	Voxalot Support	35	08-23-2009 10:25 PM
Voice outbound call Droped after 20 sec on 2/3/4060 Ports	kariakala	Voxalot Support	0	10-22-2007 03:57 PM
incoming calls to my voxalot number without sound	wycodreams	Voxalot General	22	10-04-2007 05:35 PM

03-21-2009, 02:43 AM	#11
emoci Join Date: Jul 2007 Location: Toronto, Canada Posts: 1,422 Thanks: 123 Thanked 369 Times in 282 Posts	First, in terms of setting up on non-standard ports take a look at Setting up Linksys PAP2 - Voxalot FAQ (there is a section about non-standard ports there that may help). You should not need a specific Dial Plan rule for "VoXalot" as a provider. Just to be safe, when under Smart Call/Dial Plans there is a test field where you can enter the number you're trying to call, and see if it will be properly routed with your current dial plan setup...

03-21-2009, 12:40 PM	#12
docknden1 Member Join Date: Feb 2009 Posts: 33 Thanks: 5 Thanked 0 Times in 0 Posts	Hi Everyone I have set the "NAT Keep Alive" Set to "YES" and the Interval set for "NAT Keep Alive Intvl:" is 30 as indicated in WIKI. Coming to Dial Plan rules i have created one for my mom's account in order to reach her voxalot number,which i have successfuly tested so this dial plan rule should be delete or not. I am also using the NAT parameters(as per the WIKI Option1 for Nat Parameters) with the STUN server set to stun.voxalto.com:3478. I have set my PAP2 exactly as per the WIKI. Once again a big thanks to all of yor for helping me.