Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot General

Voxalot General Voxalot discussion, tips, tricks and suggestions. Talk about them here.

 
 
Reply
Thread Tools Display Modes
Unread 12-29-2008, 06:21 AM   #1
Amiga
Junior Member
 
Join Date: Dec 2008
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Amiga is on a distinguished road
Question 2 ATAs + 1 VoIP Account = Same Caller ID / ANI for Outgoing Calls

I'm trying to figure out the easiest and cheapest means to get two ATAs, at different locations, to use the same VoIP account for outgoing calls. I have hardware devices, at two different sites, that need their modems to dial out and the server on the other end needs to see the same Caller ID / ANI information, as if both pieces of hardware were dialing from the same location. Maybe one adapter can be configured to receive incoming calls, but outgoing calls on both adapters should reflect the same Caller ID.

Last edited by Amiga; 12-29-2008 at 06:29 AM.
Amiga is offline   Reply With Quote
Unread 12-29-2008, 07:29 AM   #2
emoci
 
Join Date: Jul 2007
Location: Toronto, Canada
Posts: 1,422
Thanks: 123
Thanked 369 Times in 282 Posts
emoci is a name known to allemoci is a name known to allemoci is a name known to allemoci is a name known to all
Default

Quote:
Originally Posted by Amiga View Post
I'm trying to figure out the easiest and cheapest means to get two ATAs, at different locations, to use the same VoIP account for outgoing calls. I have hardware devices, at two different sites, that need their modems to dial out and the server on the other end needs to see the same Caller ID / ANI information, as if both pieces of hardware were dialing from the same location. Maybe one adapter can be configured to receive incoming calls, but outgoing calls on both adapters should reflect the same Caller ID.
Sounds very doable...

Consider these scenarios:

1. ATA 1 and ATA 2 are both set up with VoXalot details and can both call out (there is really no hard part about this)
2. ATA 1 and ATA 2 are both registered with VoXalot for incoming calls (This should work in most cases...a little bit of tweaking maybe required. What will happen is that when an incoming call comes, both will ring simultaneously and the first to answer takes the call)
3. ATA 1 and ATA 2 can place each call to different locations simultaneously (This will need to be tested. Both limits on channels from VoXalot and from the actual outgoing provider may get in the way. It could be more easily doable if you go with two different VoXalot accts, one for each ATA, but achieving step 2 above then gets more complicated)
4. ATA 1 and ATA 2 can communicate with each other (this will only be doable if you use two VoXalot accts. one per each ATA)

A few questions:
-What's the outgoing provider/providers you are planning on using?
-What do you know about any limits on number of channels these providers make available?
-What is the application of this setup (it may help to provide more case specific advice)?

A note: This will involve some testing and trial and error before you get it the way you want it....!
emoci is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info amroe Voxalot General 54 01-13-2014 09:11 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
plaes help thaer Voxalot Support 13 09-23-2008 03:26 AM
VoIP situation in Japan - how to improve with ENUM and peering. v164 Voxalot General 2 02-02-2008 03:05 PM
Newbie - but please be nice Mallycat Voxalot Support 21 04-15-2006 07:50 AM


All times are GMT. The time now is 11:35 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.