cant * for sip calls

dc2007 · 07-01-2007, 05:00 AM

anyone please help me to figure out how can i place a sip call because i can't do a * while diallling

all my calls can be placed without * and 00

martin · 07-01-2007, 05:20 AM

What device are you using? Some devices don't send an *.
.

dc2007 · 07-01-2007, 05:25 AM

sorry.i forgot. its spa3000

DracoFelis · 07-01-2007, 05:28 AM

Quote:

Originally Posted by dc2007

anyone please help me to figure out how can i place a sip call because i can't do a * while diallling

all my calls can be placed without * and 00

The ability to dial the *-key is usually controlled by your SIP hardware (or software), and how you have it setup.

For example, LinkSys/Sipura adapters (what I use, so I'm using them just as an example) will let you dial the *-key, but not in the default configuration of the equipment. Instead, such adapters first need their "dial plan" customized, to let the adapter know that you are planning to dial "numbers" that don't conform to the normal telco numbering system (and instead have the *-key in "unusual" places). Once you do that, LinkSys/Sipura adapters have no problems dialing these "weird" *-key dialing sequences. While the details vary, equipment from other companies often has similar "setup issues" that have to be handled (on a one-time "setup" basis).

However, before someone can direct you to info on how to properly setup your VoIP equipment (to allow the needed dialing sequences), you will have to first tell us which VoIP equipment you are using (since you omitted that very important/key info in your post)...

DracoFelis · 07-01-2007, 05:37 AM

Quote:

Originally Posted by dc2007

sorry.i forgot. its spa3000

That's a LinkSys/Sipura adapter (and FWIW the same model one I use, so I know that adapter very well). It will very much handle the *-key, as soon as you properly customize your dial-plan to allow it.

I'm assuming you want this to allow "SIP Broker" dialing (codes) via VoXaLot? If so, try adding the following to your SPA-3000's "dial plan":

Code:

*xxx[x*]. |

NOTE: You may have to press the #-key (after dialing the full SIP Broker dialing sequence) with this dial plan piece. However, as long as your VoIP provider is VoXaLot, this dial plan piece should enable you to dial any SIP Broker dialing sequence you wish to use (and then just press the #-key to tell the SPA-3000 you are done dialing).

dc2007 · 07-01-2007, 06:25 AM

my phone keeps giving me a busy tone after dialling i didn't even able to complete dialling the numbers i already got the busy tone.
i just added that line in my existing dial plan under the Line 1 tab.
by the way do i have to enable Enable IP Dialing section?

dc2007 · 07-01-2007, 06:34 AM

i figured out which part of my existing string to put it exactly..thanks a lot !
by the way,in this sip calling via voxalot. i can only call the ones that have peering..am i right?

martin · 07-01-2007, 07:47 AM

Quote:

Originally Posted by dc2007

i figured out which part of my existing string to put it exactly..thanks a lot !
by the way,in this sip calling via voxalot. i can only call the ones that have peering..am i right?

Generally any domain with a green tick here will work:

SIPBroker - Provider White Pages

as well as ENUM registered numbers.
.

07-01-2007, 05:00 AM	#1
dc2007 Member Join Date: Mar 2007 Posts: 81 Thanks: 12 Thanked 1 Times in 1 Posts	*cant for sip calls** anyone please help me to figure out how can i place a sip call because i can't do a * while diallling all my calls can be placed without * and 00

07-01-2007, 05:20 AM	#2
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	What device are you using? Some devices don't send an . . __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some Calls Never Ring Go Straight to VM	glh003	Voxalot Support	1	07-03-2007 07:21 PM
Incoming calls are being dropped	protectivedad	Voxalot Support	1	02-21-2007 05:35 PM
Not receiving calls for freedigits.	salilgokhale	Voxalot Support	2	10-24-2006 10:51 PM
Nor receiving incoming calls	Sharps1	Voxalot Support	1	10-16-2006 12:38 PM

07-01-2007, 05:25 AM	#3
dc2007 Member Join Date: Mar 2007 Posts: 81 Thanks: 12 Thanked 1 Times in 1 Posts	sorry.i forgot. its spa3000

07-01-2007, 06:25 AM	#6
dc2007 Member Join Date: Mar 2007 Posts: 81 Thanks: 12 Thanked 1 Times in 1 Posts	my phone keeps giving me a busy tone after dialling i didn't even able to complete dialling the numbers i already got the busy tone. i just added that line in my existing dial plan under the Line 1 tab. by the way do i have to enable Enable IP Dialing section?

07-01-2007, 06:34 AM	#7
dc2007 Member Join Date: Mar 2007 Posts: 81 Thanks: 12 Thanked 1 Times in 1 Posts	i figured out which part of my existing string to put it exactly..thanks a lot ! by the way,in this sip calling via voxalot. i can only call the ones that have peering..am i right?