05-19-2007, 12:33 AM | #1 |
Junior Member
Join Date: May 2007
Posts: 10
Thanks: 3 Thanked 0 Times in 0 Posts |
Linksys SPA2002 ATA
A long time ago I purchased an unlocked Linksys SPA2002 ATA.
Here are the details for this ATA: w w w .voiplink.com/SPA_2002_p/linksys-spa-2002.htm This ATA still works. I am new to VoXaLot. I would like to use this ATA with my VoXaLot account. According to the "Setting up your Hardware for Registration" section at: voxalot.com/action/static?task=display&itemOID=36 I should be able to configure the SPA2002 ATA. Is there anything else that I need to do? Any other suggestions, ideas or experiences? Thank you. |
05-19-2007, 12:39 AM | #2 |
Join Date: Feb 2006
Posts: 2,930
Thanks: 528 Thanked 646 Times in 340 Posts |
IF you follow the instructions it should work just fine.
The first test is to dial *600 (echo test) before proceeding with the more fun parts.
__________________
Martin Please post support questions on the forum. Do not send PMs unless requested. |
05-19-2007, 12:51 AM | #3 |
Junior Member
Join Date: May 2007
Posts: 10
Thanks: 3 Thanked 0 Times in 0 Posts |
Thanks for the prompt reply, Martin.
This ATA can be configured for two accounts and therefore 2 phones. I can sign up for a 2nd Voxalot account and configure that for "Phone2". Will that work? And how will Voxalot know that port 5060 is for my Phone1 and port 5061 is for my Phone2 |
05-21-2007, 10:38 AM | #4 |
Junior Member
Join Date: May 2007
Posts: 10
Thanks: 3 Thanked 0 Times in 0 Posts |
Test 1:
I dialed *600 (echo test) from this ATA. I can hear my own echo. It works. Test 2: Then I dialed a local number from the list of PSTN access numbers and entered *010nnnnnn# and the ATA phone rings and I can answer it. It works. Test 3: From a softphone on same LAN, I can dial my Voxalot ID at sip:nnnnnn@voxalot.com and the ATA phone rings and I can answer it. It works. So I unplugged the ATA and phone. I took them to my friend's apartment for the weekend and connected to the LAN there. Test 1 and 3 work again. No problems. But Test 2 does not. The ATA phone rings. I cannot hear the caller. The caller cannot hear me. So we assume it is a firwall issue. We were able to peek at the firewall logs and noticed the following entry repeat 6 times: from: udp 204.11.194.10 sipbroker1.telengy.net remote port: 16540 local port: 18866 We cannot make any changes to this firewall. The internet access is provided and controlled by the apartment complex. So can I adjust my ATA settings to make this work? Which settings would these be? STUN server? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LinkSys RT32P2 setup | mbahamon | Voxalot Support | 0 | 06-07-2007 03:52 PM |
Port 5061, Linksys WRT54GP2 | vk4akp | Voxalot Support | 21 | 03-20-2007 12:34 PM |
Linksys WRT54GP2 config Help needed PSE? | vk4akp | Voxalot Support | 2 | 03-18-2007 02:42 PM |
Linksys PAP2T Configuration | amroe | Voxalot Support | 0 | 10-27-2006 05:01 PM |
Linksys spa3102 and Gateways.Help needed. | blackrider | Voxalot Support | 2 | 10-21-2006 07:17 AM |