Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > SIP Broker Forums > SIP Broker Support

SIP Broker Support Support for the SIP Broker service.

 
 
Reply
Thread Tools Display Modes
Unread 05-03-2007, 02:01 AM   #1
v164
Member
 
Join Date: Mar 2006
Posts: 96
Thanks: 8
Thanked 26 Times in 19 Posts
v164 is a jewel in the roughv164 is a jewel in the rough
Default Direct incoming calls SRV problem - alternative solution

DracoFelis has written this article on accepting incoming SIP calls direct to your SIP device:

"How to accept direct inbound calls to your LinkSys/Sipura adapter, bypassing all VoIP providers."
SIP Broker Wiki : Inbound Calls Directly to your LinkSys or Sipura


The method involved uses the SIP URI:

sip:userid@dyamic_dns_address

However, as described in the article, this won't work with some SIP proxies that require an SRV record. The solution presented is to use a SipBroker alias, so that the incoming call comes in via SipBroker. (The sipbroker.com SIP proxy happily uses an A record if there is no SRV record.)


I've been reading through RFC 3261 (SIP), and the referred-to RFC 3263 (locating SIP servers), and I think I've found an alternative solution:

Instead of using the SIP URI:

sip:userid@dyamic_dns_address

use this SIP URI:

sip:userid@dyamic_dns_address:5060


From RFC 3263:
Quote:
This is a change from RFC 2543. Previously, if the port was
explicit, but with a value of 5060, SRV records were used. Now, A
or AAAA records will be used.
(ie, even if your SIP device is listening on the standard port 5060, specifying the port forces the SIP proxy to use A records rather than SRV records).


This solution, I think, could be more reliable than going via the sipbroker.com proxy, which introduces a further point of potential failure (such as the "lr=on" problem).
v164 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Incoming call problem pironato Voxalot Support 18 06-21-2007 11:25 AM
Incoming calls are being dropped protectivedad Voxalot Support 1 02-21-2007 05:35 PM
Stanaphone - problem incoming calls Jared Voxalot Support 3 01-29-2007 02:41 PM
Problem with incoming calls.. Williamz Voxalot Support 0 01-16-2007 12:00 PM
Nor receiving incoming calls Sharps1 Voxalot Support 1 10-16-2006 12:38 PM


All times are GMT. The time now is 05:31 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.