Linksys PAP2 audio issues only for incoming calls

emoci · 11-17-2010, 03:15 AM

How are you testing incoming calls to VoXalot?

I would suggest:

-Call local SipBroker number. When prompted enter *010-123456 (where 123456 is your VoXalot number). Does the call ring...is there audio etc.

-Or try entering your SIP URI 123456@voxalot.com here: SIPBroker - EziDial ... do you receive and incoming casll from the Echo test server?

amaramrahul · 11-17-2010, 05:29 AM

There are multiple ways I have tried incoming calls. Assuming xxxxxx is my voxalot id.

1. Calling directly from another SIP adapter (in a different network) to xxxxxx@eu.voxalot.com. [Phone rings but no audio both ways]

2. Calling from another registed voxalot account to xxxxxx@eu.voxalot.com [Phone rings but no audio both ways]

3. Calling the SIP broker service and dialling *010xxxxxx [Phone rings and from what I remember only the caller is able to hear the voice]

4. Calling the SIP broker service and dialling *013<enum number pointing to xxxxxx@eu.voxalot.com> [Phone rings but only the caller is able to hear the voice]

I am now thinking of configuring Callcentric on another line and testing incoming. Because if that works, then at least I could rule out issues with firmware and/or network.

Btw, thanks for all the responses. It gives me one more reason why I should not give up on Voxalot

.

amaramrahul · 11-17-2010, 07:33 AM

Alright this gets more puzzling. I've just configured my callcentric account on Line 2 by following the guide at Linksys PAP2 configuration. And guess what! Incoming works perfectly for call centric. I've tried calling through SIP Broker as well as direct SIP uri (xxxxxxxxxxxx@in.callcentric.com) and both of them work perfectly. No port triggering! No port forwarding!

So, the issue I am facing, is this specific to Voxalot+PAP2? Should this be raised as a bug somewhere? Could someone kindly confirm?

11-17-2010, 05:29 AM	#2
amaramrahul Junior Member Join Date: Nov 2010 Posts: 11 Thanks: 1 Thanked 0 Times in 0 Posts	There are multiple ways I have tried incoming calls. Assuming xxxxxx is my voxalot id. 1. Calling directly from another SIP adapter (in a different network) to xxxxxx@eu.voxalot.com. [Phone rings but no audio both ways] 2. Calling from another registed voxalot account to xxxxxx@eu.voxalot.com [Phone rings but no audio both ways] 3. Calling the SIP broker service and dialling 010xxxxxx [Phone rings and from what I remember only the caller is able to hear the voice] 4. Calling the SIP broker service and dialling 013<enum number pointing to xxxxxx@eu.voxalot.com> [Phone rings but only the caller is able to hear the voice] I am now thinking of configuring Callcentric on another line and testing incoming. Because if that works, then at least I could rule out issues with firmware and/or network. Btw, thanks for all the responses. It gives me one more reason why I should not give up on Voxalot . Last edited by amaramrahul; 11-17-2010 at 05:31 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free DID Numbers, Free Voip Calls, & more Voip Info	amroe	Voxalot General	54	01-13-2014 09:11 AM
Incoming Calls Drop or No Audio	All4Fun	Voxalot Support	24	07-31-2009 10:55 PM
Voxalot 800 calls audio distorted	psehorne	Voxalot Support	1	11-15-2007 02:40 AM
Voxalot --> Voxalot calls are not getting completed? Any issues	shibukraj	Voxalot Support	2	01-09-2007 04:16 AM

11-17-2010, 03:15 AM	#1
emoci Join Date: Jul 2007 Location: Toronto, Canada Posts: 1,422 Thanks: 123 Thanked 369 Times in 282 Posts	How are you testing incoming calls to VoXalot? I would suggest: -Call local SipBroker number. When prompted enter *010-123456 (where 123456 is your VoXalot number). Does the call ring...is there audio etc. -Or try entering your SIP URI 123456@voxalot.com here: SIPBroker - EziDial ... do you receive and incoming casll from the Echo test server?

11-17-2010, 07:33 AM	#3
amaramrahul Junior Member Join Date: Nov 2010 Posts: 11 Thanks: 1 Thanked 0 Times in 0 Posts	Alright this gets more puzzling. I've just configured my callcentric account on Line 2 by following the guide at Linksys PAP2 configuration. And guess what! Incoming works perfectly for call centric. I've tried calling through SIP Broker as well as direct SIP uri (xxxxxxxxxxxx@in.callcentric.com) and both of them work perfectly. No port triggering! No port forwarding! So, the issue I am facing, is this specific to Voxalot+PAP2? Should this be raised as a bug somewhere? Could someone kindly confirm?