How to choose an operator manually

tomek · 01-31-2007, 12:22 AM

Do you have any idea how to construct the dial plan to decide at the time of dialing by which provider the call will be made? If I write for example:
_44444. $(EXTEN:5) PROVIDER - it doesn't work (4444 was supposed to be added additionaly before my actual number to direct the call to PROVIDER 1 and then skipped). Can it be achieved in any other way?
Thanks for any help. Tomek

martin · 01-31-2007, 01:24 AM

The way you describe should work ok. Best advice is to put the number you are dialling in the test field and check where it is routing.

The are many posts in the forum where members have done a similar thing. A quick search should help you find them.

MGifos · 01-31-2007, 03:28 AM

Hi tomek,

It might be just a typo but you have five 4s in your plan but your description of the problem "(4444 was supposed to..." only contains four 4s.

MG.

tomek · 01-31-2007, 03:06 PM

I found the reason of my problems - it was a dialplan in my ATA. I changed it and now it works great! Thank you for your help!

01-31-2007, 12:22 AM	#1
tomek Junior Member Join Date: Jan 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	How to choose an operator manually Do you have any idea how to construct the dial plan to decide at the time of dialing by which provider the call will be made? If I write for example: _44444. $(EXTEN:5) PROVIDER - it doesn't work (4444 was supposed to be added additionaly before my actual number to direct the call to PROVIDER 1 and then skipped). Can it be achieved in any other way? Thanks for any help. Tomek

01-31-2007, 01:24 AM	#2
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	The way you describe should work ok. Best advice is to put the number you are dialling in the test field and check where it is routing. The are many posts in the forum where members have done a similar thing. A quick search should help you find them. __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.

01-31-2007, 03:06 PM	#4
tomek Junior Member Join Date: Jan 2007 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	I found the reason of my problems - it was a dialplan in my ATA. I changed it and now it works great! Thank you for your help! Last edited by tomek; 01-31-2007 at 07:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough	ctylor	Voxalot General	5	04-28-2010 12:52 AM

01-31-2007, 03:28 AM	#3
MGifos Member Join Date: Jan 2007 Location: Melbourne, AU Posts: 35 Thanks: 3 Thanked 5 Times in 5 Posts	Hi tomek, It might be just a typo but you have five 4s in your plan but your description of the problem "(4444 was supposed to..." only contains four 4s. MG.