Nokia Support - Page 3

Tranworld · 04-06-2007, 01:29 AM

When it's on you hear the 1st part of the ring and then a message "the person you are trying to call is busy.."

Dana · 05-25-2007, 10:53 PM

After following through this thread, I setup my Nokia E61 as suggested, and it does say that it is registered with my Voxalot account. Registration does not seem to be the problem.

The problem is that the E61 does not receive or make any calls.
Inbound calls to it get a recorded message saying the user is not available, so it goes to voice mail. Outbound calls from it get nothing but dead silence.

Does this sound familiar to anyone there?

BTW, my E61 connects to the Internet through my home computer, setup as a Wifi access point. The access point is connected to the Internet through my Grandstream ATA-486, which is also registered to Voxalot with a different account. The E61 has good Wifi Internet connectivity in this setup, so that is not the problem.

Could the ATA-486 between the Internet and the E61 be the problem?
I would not think the dual account situation would be a problem, but I will try eliminating the ATA-486 for troubleshooting, if there are no other suggestions.

richard99 · 05-28-2007, 06:37 PM

I have same mobile, work fine. Use port 5060, as my previous mail it did not register to port 4060,3060 and 2060. Reboot the mobile (Switch Off & On ). Then try the voxalot echo number *600. It should work.

If still problem exist, update to the latest firmware I think the last one is 3.0.663.09.04.
I think this is best mobile for VOIP.

slackwarebox · 06-17-2007, 05:19 PM

After following the instructions. I have successfully registered my Voxalot account on my E70 (firmware 2.01618.07.10)
I tried calling the echo test number *600 but it did not connect. I also have tried my VoIPStunt account and still a no go.
Any ideas?
Thanks

clundestad · 06-17-2007, 09:33 PM

Slackwarebox: Upgrade your firmware to the latest version. There are major changes to the VoIP client in version 3 of the firmware (e.g. STUN functionality)

My E70 works perfectly, it has FW 3.0633.09.04.

Roj · 07-14-2008, 02:04 AM

Hi Martin,
My registration was successful, however any number I dial comes back with an automated message - "The number you have dialed can not be connected, please try again"

I used the Australian settings.

Please help,
Roj

oliverlevan · 07-14-2008, 07:13 PM

I have all the settings in the proper way and no firewall and even like this no audio . it is funny that if I use another vitrtual pbxes like liberailvoip or pbxes I dont have audio problems

827832 · 10-18-2008, 05:53 AM

I followed the instructins for the E51 but I still get Registration Failed. I am connected via Wifi to my home network, modem is VOIP enabled, not sure that makes any difference. Any sugggestions? For Proxy server I have tried both sip:au.voxalot.com and the IP address. Neither works

3essawe · 10-26-2008, 05:34 PM

Hi Guys , I little dumb at this stuff , but the settings are fine and I dial 600 and its working fine ,, but I wonder can I make calls to PSTN or Cell phones abroad , not just VOIP phones and I need a clear guide for that ,, thanks ..

441516 · 11-03-2008, 02:50 PM

SIP VoIP Settings
These SIP VoIP Settings applications enable users to configure VoIP settings on S60 devices supporting Nokia S60 VoIP Release 2.2, 2.3, or 3.0.

SIP VoIP Settings
I think these settings should enable internet telephony in latest N Series.

05-25-2007, 10:53 PM	#2
Dana Junior Member Join Date: Apr 2007 Posts: 2 Thanks: 0 Thanked 1 Times in 1 Posts	Nokia E61 with Voxalot After following through this thread, I setup my Nokia E61 as suggested, and it does say that it is registered with my Voxalot account. Registration does not seem to be the problem. The problem is that the E61 does not receive or make any calls. Inbound calls to it get a recorded message saying the user is not available, so it goes to voice mail. Outbound calls from it get nothing but dead silence. Does this sound familiar to anyone there? BTW, my E61 connects to the Internet through my home computer, setup as a Wifi access point. The access point is connected to the Internet through my Grandstream ATA-486, which is also registered to Voxalot with a different account. The E61 has good Wifi Internet connectivity in this setup, so that is not the problem. Could the ATA-486 between the Internet and the E61 be the problem? I would not think the dual account situation would be a problem, but I will try eliminating the ATA-486 for troubleshooting, if there are no other suggestions.

05-28-2007, 06:37 PM	#3
richard99 Senior Member Join Date: Feb 2007 Location: Indiana, USA Posts: 166 Thanks: 14 Thanked 22 Times in 19 Posts	Nokia E61 with Voxalot I have same mobile, work fine. Use port 5060, as my previous mail it did not register to port 4060,3060 and 2060. Reboot the mobile (Switch Off & On ). Then try the voxalot echo number 600. It should work. If still problem exist, update to the latest firmware I think the last one is 3.0.663.09.04. I think this is best mobile for VOIP. Last edited by richard99; 05-28-2007 at 06:40 PM.*

07-14-2008, 02:04 AM	#6
Roj Junior Member Join Date: Jul 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Number can not connect - Nokia E65 Hi Martin, My registration was successful, however any number I dial comes back with an automated message - "The number you have dialed can not be connected, please try again" I used the Australian settings. Please help, Roj

10-18-2008, 05:53 AM	#8
827832 Junior Member Join Date: Oct 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Problems with Nokia E71 I followed the instructins for the E51 but I still get Registration Failed. I am connected via Wifi to my home network, modem is VOIP enabled, not sure that makes any difference. Any sugggestions? For Proxy server I have tried both sip:au.voxalot.com and the IP address. Neither works

10-26-2008, 05:34 PM	#9
3essawe Junior Member Join Date: Oct 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Please Help Hi Guys , I little dumb at this stuff , but the settings are fine and I dial 600 and its working fine ,, but I wonder can I make calls to PSTN or Cell phones abroad , not just VOIP phones and I need a clear guide for that ,, thanks ..

04-06-2007, 01:29 AM	#1
Tranworld Senior Member Join Date: Feb 2007 Posts: 128 Thanks: 1 Thanked 5 Times in 4 Posts	When it's on you hear the 1st part of the ring and then a message "the person you are trying to call is busy.."

06-17-2007, 05:19 PM	#4
slackwarebox Junior Member Join Date: Jun 2007 Posts: 1 Thanks: 1 Thanked 0 Times in 0 Posts	After following the instructions. I have successfully registered my Voxalot account on my E70 (firmware 2.01618.07.10) I tried calling the echo test number *600 but it did not connect. I also have tried my VoIPStunt account and still a no go. Any ideas? Thanks

06-17-2007, 09:33 PM	#5
clundestad Member Join Date: Jul 2006 Location: Oslo, Norway Posts: 43 Thanks: 4 Thanked 10 Times in 8 Posts	Slackwarebox: Upgrade your firmware to the latest version. There are major changes to the VoIP client in version 3 of the firmware (e.g. STUN functionality) My E70 works perfectly, it has FW 3.0633.09.04.

07-14-2008, 07:13 PM	#7
oliverlevan Junior Member Join Date: Jun 2008 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	I have all the settings in the proper way and no firewall and even like this no audio . it is funny that if I use another vitrtual pbxes like liberailvoip or pbxes I dont have audio problems

11-03-2008, 02:50 PM	#10
441516 Senior Member Join Date: Sep 2006 Location: W.Yorkshire, United Kingdom Posts: 128 Thanks: 3 Thanked 2 Times in 2 Posts	Nokia S60 VoIP Release 2.2, 2.3, or 3.0. SIP VoIP Settings These SIP VoIP Settings applications enable users to configure VoIP settings on S60 devices supporting Nokia S60 VoIP Release 2.2, 2.3, or 3.0. SIP VoIP Settings I think these settings should enable internet telephony in latest N Series.