New Betamax offering??

[foneboxx]

Better when things are this way.
Thanx guys...
That said, i use nch pbx and will report here if the config described above with the systematic forwarding between pstn, voxalot, justvoip and the pbx works.

Regards!

[card]

It doesn`t work.

It seems it doesn`t work to forward from PBX** to user@sip.justvoip.com. It just give busy tone.

I hope martin will find a solution to be able to forward directly from VoXaLot to any sip address including Betamax, and especially justvoip and others.

[martin]

You can only forward to a SIP URI if the destination allows open inbounds. A good way to check is to look for a green tick here:

SIPBroker - Provider White Pages

.

[pauloneopark]

In the Voxalot most easy despite Pbxes…

Its goes in speedy dial and ADD nick in the Justvoip of this form:
In the screen Speed Dial Book-

In Dial “it types I number it that to desire”;

In name “it places what to desire”; former: Justvoip;

In Route Call you: “it selects Phone Number”;

In Number Call “nick in the Justvoip places yours”;

In Provider “one of the Betamax selects any “that vc have registered in cadastre (voipbusterpro, voipdicount, internetcalls, etc…)

This soon now to bind using Justvoip, using the telephone hardwired in the ATA where Voxalot is registered or in the X-Lite.

You have to have to go previously in the Web site of the Justvoip and to enter in configuraçoes to place in CallForward or Desvio of call to place in the first option ALWAYS and the second option I number it of the telephone that wants to bind.

Soon now It types ** and I number it dial that registered in cadastre to call Justvoip, that it goes to bind for numbers it that vc placed previously in shunting line of call without no tax of connection and Free

[andy]

Betamax doesn't accept peering from everywere

I don't understand why people want to make it complicated.

Forward a DID to the JV or 12Voip SIP address, then use a different provider in Voxalot to call or forward to the DID. If this is the only use of the DID, it scarcely matters what country it's in

[kurun]

Andy, I have to strongly agree with you.
Why complicate things when the simpler approaches work so much more reliably, with less dropouts and minimal latency?

Having said that, it is possible to forward an incoming call to a Voxalot account out to a Betamax account using the Forwarding feature in Voxalot, as follows :

1) Set up a Forwarding Rule in Voxalot
2) Select Forward Inbound Call to - "Phone Number"
3) Enter Betamax_ID in Forwarding Number field
4) Select Betamax_Provider in Provider dropdown field

I tested to my Betamax Account using the Windows Client as the receiving account.

I could successfully establish 2 way conversation with an inbound call from

a) another Voxalot Account
b) a call to a DID captive to an account registered in Voxalot, and
c) a Mobile call to my Voxalot account via a Sip Broker Access number.


._

[pauloneopark]

Originally Posted by andy

Betamax doesn't accept peering from everywere

I don't understand why people want to make it complicated.

Forward a DID to the JV or 12Voip SIP address, then use a different provider in Voxalot to call or forward to the DID. If this is the only use of the DID, it scarcely matters what country it's in

Friends,

I used this system does not stop complicating! It is known by all the peoples who JV and 12VP do not accept register sip and nor sofphone generic softphone only proper! as taste not to make linking in PC, and I possess an ATA using my device of telephone to effect my linkings being used JV which stop my country have linkings for landlines FREE without connection load, for these reasons use it atravez of speed dial where all my linkings are free paying only 10,00 euros per 120 days, they had understood now!

[pauloneopark]

I am in Brazil, where it does not have corrector of SIP Free as in other country.

[pauloneopark]

[quote=kurun;9510]Andy, I have to strongly agree with you.
Why complicate things when the simpler approaches work so much more reliably, with less dropouts and minimal latency?

Having said that, it is possible to forward an incoming call to a Voxalot account out to a Betamax account using the Forwarding feature in Voxalot, as follows :

1) Set up a Forwarding Rule in Voxalot
2) Select Forward Inbound Call to - "Phone Number"
3) Enter Betamax_ID in Forwarding Number field
4) Select Betamax_Provider in Provider dropdown field




KURUN,

To use this yours metodo I use Pbxes, where it has the Callthrun option and I have line signal and I can dial any number in real time without the necessity of one pre-I register in cadastre of the destination telephone, much more easy, in my opinion only thing that lacks the Voxalot to be perfect achedito that this must be implanted in a future proximo.

Therefore the system that I passed is only for burla the Jv of the Betamax for not accepting the configuration SIP, comprende where I can make linkings using my device of telephone and not to use VP in the PC is only esa the purpose

[andy]

Originally Posted by kurun

1) Set up a Forwarding Rule in Voxalot
2) Select Forward Inbound Call to - "Phone Number"
3) Enter Betamax_ID in Forwarding Number field
4) Select Betamax_Provider in Provider dropdown field

That's even simpler, no DID required, and I wonder why I didn't think of it, especially when I'd already used forwarding to a username on another VoIP provider