Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > Voxalot Forums > Voxalot Support

Voxalot Support Support for the Voxalot service.

 
 
Reply
Thread Tools Display Modes
Unread 09-30-2006, 05:01 PM   #1
ptruman
Member
 
Join Date: Sep 2006
Posts: 94
Thanks: 1
Thanked 8 Times in 8 Posts
ptruman is on a distinguished road
Default Argh! Outgoing PSTN nightmare with 488

Hi all

I have a (new) Handytone 488.

I have registered with various SIP provider and can make/receive calls. I can receive PSTN calls.

I CANNOT make PSTN calls!

I cannot, however, make PSTN outgoing calls. It drops a connected call after about .5 a second.

Bizarrely, if I connect the outside line, and ring "***", I hear the Telewest "attendant" saying "The number you called" etc, perfectly fine.
If I connect outside and ring 123, and it picks up, one end drops the call.

SYSLOG from the first example (in reverse order) :

1367DAA Hangup 2
FXO killcall 0 1 33251 0
1367DAA Hangup 4
1350DAA Pickup 2

SYSLOG from the second example (in reverse order) :

1367DAA Hangup 2
(I hangup handset here)
1367DAA Hangup 2
FXO killcall 0 1 0 0
1350DAA Pickup 2

Something (killcall) kills the call, and I see a Hangup "2" rather than a "4". I also see another "2" when I actually disconnect the handset.

I suspect this is something to do with voltage and impedance.

Port FXS (the handset) has the following options :

Onhook threshold : 800ms
FXS Impedance : UK/New Zealand #2 (370 Ohm + 620 Ohm||310nF)
Onhook Voltage : 36V
Polarity Reveral : NO

Port FX0 (the line, connected to Telewest) has the following options :

PSTN AC Termination : 370 Ohm + (620 Ohm || 301nF)

Now, the Telewest FAQ says (on Network Termination Impedance) :

The impedance necessary to satisfactorily terminate the Telewest network interface at the NTP so as to prevent instability is represented by a three-element network consisting of a 620 ohm resistor in parallel with a 310 nanofarad capacitor, both in series with a 370 ohm resistor.

My FXS Impedance matches this.

My handsets are cordless DECT, but I have tried with a wired handset. No difference.
ptruman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Codec order for SIP - PSTN calls occamsrazor Voxalot Support 0 03-08-2007 10:05 AM
Outgoing calls to PSTN with voipbuster issues. turbodiesel Voxalot Support 2 01-18-2007 05:38 AM
Forward calls from PSTN to mobile via Pennytel - HELP BJReplay Voxalot Support 0 12-22-2006 12:04 AM
Help with PSTN registration. Hally Voxalot Support 0 12-12-2006 08:04 AM
PSTN to PSTN Question newbie_mt Voxalot Support 3 04-07-2006 12:15 AM


All times are GMT. The time now is 08:04 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.