What is the "Inbound CID Pattern" for "no caller ID/number"?

130166 · 06-22-2007, 12:32 PM

Hello,

I want inbound call's without caller-id(number) forward to a mailbox with a message "This phone can not ring without your number, please call again with your number." or something like that.

But which "Inbound CID Pattern" matches "no caller ID/number"?
_Z.(not beginning with zero)(no number is zero too?) ?
_ (is nothing?) ?
_

?

(BTW: Voxalot's "lady of the voicemail" want make the message?

)

130166 · 07-05-2007, 10:31 PM

Difficult or not possible?

martin · 07-05-2007, 10:54 PM

Sorry call forwarding CID if left blank in a rule will forward *all* inbound calls. It's a nice suggestion though and one I have made a note of.

BTW the voicemail lady message can be changed by dialing *500 and at the prompt dial:

0 -> mailbox options and then 1->Record message etc.
.

richard99 · 07-06-2007, 07:48 AM

Inbound CID Pattern work fine if it is in number format, but in case of Freedights, there CID is not a number format but in characters like "Freedigits" and Inbound CID Pattern does not recognized in Call Forward list and fails.
As a suggestion make Inbound CID Pattern alpha numeric to handle all situations.

gambrinus · 07-06-2007, 08:33 AM

Quote:

Originally Posted by martin

Sorry call forwarding CID if left blank in a rule will forward *all* inbound calls. It's a nice suggestion though and one I have made a note of.

This is kinda funny... I just wanted to post a question on how to setup a pattern for "caller ID not presented" because I want to use exactly this with Voxalot.
I have used this with sipgate, but since they decided to block Voxalot I will terminate the account.

The reason for this feature request is that many telemarketers call with CLI disabled. So I want a mailbox message saying:
"Unfortunately you cannot reach me directly because your CLI is not presented. Please call again presenting your CLI or leave a message after the tone..."

Martin, when do you think the feature will be made available?

gambrinus

martin · 07-06-2007, 10:35 AM

Quote:

Originally Posted by gambrinus

Martin, when do you think the feature will be made available?

gambrinus

There are a couple of new rule types we want to add to call forwarding and this will be one of them as well as the ability to allow calls through for example family members etc.

Watch this space

gambrinus · 07-08-2007, 10:03 PM

Quote:

Originally Posted by martin

There are a couple of new rule types we want to add to call forwarding and this will be one of them as well as the ability to allow calls through for example family members etc.

You're simply the best.

ctylor · 07-11-2007, 01:47 AM

I find it varies with your DID provider. AFAIK, an incoming SIP URI call always has a sip:something@provider.org address (or sip:something@0.0.0.0). Figure out what the caller id is reported as in in your software/sip device--I find unknown is typically sent as "0" (the numeral zero) with Voxbone--and enter a generic rule for it.

130166 · 08-31-2007, 10:21 AM

So for example:

100 has no digits Every - - 0878720433 via Xs4all Yes

Thanks to dutch "Saskia" and english "I forgot her name" .

06-22-2007, 12:32 PM	#1
130166 Senior Member Join Date: May 2007 Location: Katwijk, The Netherlands Posts: 133 Thanks: 57 Thanked 32 Times in 27 Posts	What is the "Inbound CID Pattern" for "no caller ID/number"? Hello, I want inbound call's without caller-id(number) forward to a mailbox with a message "This phone can not ring without your number, please call again with your number." or something like that. But which "Inbound CID Pattern" matches "no caller ID/number"? _Z.(not beginning with zero)(no number is zero too?) ? _ (is nothing?) ? _ ? (BTW: Voxalot's "lady of the voicemail" want make the message? ) Last edited by 130166; 06-22-2007 at 03:42 PM. Reason: remark about voice

07-05-2007, 10:31 PM	#2
130166 Senior Member Join Date: May 2007 Location: Katwijk, The Netherlands Posts: 133 Thanks: 57 Thanked 32 Times in 27 Posts	Difficult or not possible? Difficult or not possible?

07-05-2007, 10:54 PM	#3
martin Join Date: Feb 2006 Posts: 2,930 Thanks: 528 Thanked 646 Times in 340 Posts	Sorry call forwarding CID if left blank in a rule will forward all inbound calls. It's a nice suggestion though and one I have made a note of. BTW the voicemail lady message can be changed by dialing 500 and at the prompt dial: 0 -> mailbox options and then 1->Record message etc. . __________________ Martin Please post support questions on the forum. Do not send PMs unless requested.*

07-06-2007, 07:48 AM	#4
richard99 Senior Member Join Date: Feb 2007 Location: Indiana, USA Posts: 166 Thanks: 14 Thanked 22 Times in 19 Posts	Freedigits "Inbound CID Pattern" Inbound CID Pattern work fine if it is in number format, but in case of Freedights, there CID is not a number format but in characters like "Freedigits" and Inbound CID Pattern does not recognized in Call Forward list and fails. As a suggestion make Inbound CID Pattern alpha numeric to handle all situations.

08-31-2007, 10:21 AM	#9
130166 Senior Member Join Date: May 2007 Location: Katwijk, The Netherlands Posts: 133 Thanks: 57 Thanked 32 Times in 27 Posts	New number match rule type "has no digits" in Call Connection (Call Forwarding) So for example: 100 has no digits Every - - 0878720433 via Xs4all Yes Thanks to dutch "Saskia" and english "I forgot her name" .

07-11-2007, 01:47 AM	#8
ctylor Join Date: Apr 2006 Location: Vancouver, BC Posts: 296 Thanks: 94 Thanked 53 Times in 27 Posts	I find it varies with your DID provider. AFAIK, an incoming SIP URI call always has a sip:something@provider.org address (or sip:something@0.0.0.0). Figure out what the caller id is reported as in in your software/sip device--I find unknown is typically sent as "0" (the numeral zero) with Voxbone--and enter a generic rule for it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode