Click Here To Visit SIP Broker  

Go Back   Voxalot / SIP Broker Support Forums > SIP Broker Forums > SIP Broker Support

SIP Broker Support Support for the SIP Broker service.

 
 
Reply
Thread Tools Display Modes
Unread 12-23-2009, 04:22 PM   #1
alfonso
Junior Member
 
Join Date: Dec 2009
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
alfonso is on a distinguished road
Default Problem when I use a router

My configuration is:MODEM>>SIPURA SPA3102>>PC and this works perfect with the SipBroker alias. I work with NO-IP to set up a DNS address. DNS is updated by PC.
If I use the following configuration: MODEM>>LINKSYS WRT320N>>SIPURA SPA3102 then the bell rings but there is no voice coming through. In this case I work with DynDNS to set up a DNS address. DNS is updated by the router.
If somebody can help. Thanks a lot.
alfonso is offline   Reply With Quote
Unread 12-26-2009, 05:18 PM   #2
boatman
Senior Member
 
boatman's Avatar
 
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17
Thanked 77 Times in 64 Posts
boatman is on a distinguished road
Default

Quote:
Originally Posted by alfonso View Post
If I use the following configuration: MODEM>>LINKSYS WRT320N>>SIPURA SPA3102 then the bell rings but there is no voice coming through.
Are you speaking of receiving the SIP call directly, not through your Voxalot number?

The problem you mentioned is likely caused by your SPA3102 sending it's local IP address and port as RTP connection information (found inside SIP headers). When this happens the remote SIP device often does not send any voice packets towards you, so you hear nothing. Ordinarily, RTP connection information should be given as an external WAN IP address and port number. The following settings may fix your problem.

(under SIP tab)
SIP_T1: 1
Handle_VIA_received: yes
Handle_VIA_rport: yes
Insert_VIA_received: yes
Insert_VIA_rport: yes
Substitute_VIA_Addr: yes
Send_Resp_To_Src_Port: yes
STUN_Enable: yes
STUN_Test_Enable: yes
STUN_Server: stun.voxalot.com:3478 (or any STUN server such as 'stun01.sipphone.com:3478' or 'stun.sipgate.net:10000')
NAT_Keep_Alive_Intvl: 179 (if your phone does not always ring on incoming calls when using '179' try 119 or 59, use highest number that works)

(under Line_1 and Line_2 (or PSTN_Line) tabs)
NAT_Mapping_Enable: yes
NAT_Keep_Alive_Enable: yes
NAT_Keep_Alive_Msg: 0000
NAT_Keep_Alive_Dest: $PROXY
Register Expires: 3600

----------

Optional settings, steps 1 - 4:
Sometimes its preferable to operate the ATA independently of a STUN server. The benefit is that phone service can continue no matter if the STUN server is working. See steps 1 to 4 below.

1. Forward the SIP ports and the RTP port range from the router to the ATA.
2. Set "STUN Enable:" no
3. Set "NAT Keep Alive Enable:" no
4. The ATA must learn it's public IP address, either through normal SIP registration, or place your public IP address in the 'EXT IP:' field).
boatman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Atcom AT-530 firmware bug v164 Voxalot Support 2 06-16-2012 09:22 AM
Voxalot and Sipura/ATA Tutorial: A Comprehensive Walkthrough ctylor Voxalot General 5 04-28-2010 12:52 AM
Help with complex problem elleff Voxalot Support 0 06-27-2007 01:16 PM
Router stopping service? belchie Voxalot Support 1 11-07-2006 03:03 AM
Pennytel, Buzz problem Nathanc Voxalot Support 17 06-28-2006 12:20 AM


All times are GMT. The time now is 09:52 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.