|
Voxalot Support Support for the Voxalot service. |
Thread Tools | Display Modes |
07-02-2007, 10:07 AM | #1 |
Junior Member
Join Date: Feb 2006
Location: UK
Posts: 17
Thanks: 0 Thanked 1 Times in 1 Posts |
Voicemail:Message Waiting Indicator, SPA-3000
SPA-3000
The voicemail works perfecly. The interrupted dial tone works perfectly. Problem: The message waiting indicator, on the phone handset, comes on but often just stays on until I reset the ATA. The 'Info' tab on the SPA-3000 web interface shows 'Message Waiting: No' even though the MWI on the phone reamins on. Any suggestions? |
07-02-2007, 05:16 PM | #2 |
Join Date: Apr 2006
Location: Vancouver, BC
Posts: 296
Thanks: 94 Thanked 53 Times in 27 Posts |
In my (somewhat limited) experience, I think I've figured out that this is a phone problem and not a Sipura prob. I have a Panasonic cordless with a MWI light that will also stay on, even after the stutter tone is canceled in the Sipura and the phones are not being flashed the caller ID "Msg Waiting". My experience might be different from yours because even after unplugging the Sipura the problem remained on the Panasonic. It was only corrected when the phone rang a second time, which I guess makes the Panasonic go back and check if there is any new message waiting.
|
07-02-2007, 11:39 PM | #3 | |
Join Date: Mar 2006
Posts: 188
Thanks: 4 Thanked 64 Times in 41 Posts |
Quote:
I've found the following settings to help with this, by causing the adapter to send the "message canceled" info (to the phone) every few minutes (instead of only sending it once). That way, if the phone misses the message the first time, it will likely get the message (and turn off its light) a few minutes later: VMWI Ring Splash Len: 0 (on the User tab) VMWI Refresh Intvl: 300 (on the Regional tab) |
|
07-10-2007, 05:17 AM | #4 | |
Member
Join Date: Mar 2007
Posts: 81
Thanks: 12 Thanked 1 Times in 1 Posts |
hi there i tried this tweak and its working but recently the "Message Waiting:" strangely it keeps going back to 'no' while im not doing with it.
do i have to change anything in the : SIP---> NAT Support Parameters Quote:
|
|
07-14-2007, 11:20 AM | #5 | |
Junior Member
Join Date: Feb 2006
Location: UK
Posts: 17
Thanks: 0 Thanked 1 Times in 1 Posts |
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SPA 3000 configuration for Voxalot Voicemail? | MrHatken | Voxalot Support | 2 | 11-12-2006 07:21 AM |