Thread: Nokia Support
View Single Post
Unread 09-07-2006, 11:18 AM   #1
martin
 
Join Date: Feb 2006
Posts: 2,930
Thanks: 528
Thanked 646 Times in 340 Posts
martin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the roughmartin is a jewel in the rough
Default Nokia Support

VoXaLot has developed a workaround for the NAT issues surrounding the Nokia eSeries phone. If you are interested try these settings:

SIP Settings:

Profile name: VoXaLot
Service profile: IETF
Default access point: <for you to define>
Public user name: sip:xxxxxx@us.voxalot.com <- where xxxxxx is user VoXaLot user name. If you want to use the Australian cluster set to sip:xxxxxx@au.voxalot.com and for Europe set sip:xxxxxx@eu.voxalot.com
Use compression: No
Registration: Always on
Use security: No

Proxy server:

Proxy server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com

Note: Older version of firmware require IP addresses. If that is the case use:

Proxy server address: sip:64.34.163.35 <- For the Australian cluster use sip:202.60.75.46 and for Europe use sip:85.17.19.194

Realm: voxalot.com
User name: xxxxxx. <- where xxxxxx is user VoXaLot user name
Password: <your VoXaLot password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server:

Registrar server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com
Realm: voxalot.com
User name: xxxxxx. <- where xxxxxx is user VoXaLot user name
Password: <your VoXaLot password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Once the eSeries is registered, to test inbounds from any other phone dial any of the SIP Broker access numbers found here:

http://www.sipbroker.com/sipbroker/action/pstnNumbers

At the voice prompt, dial *010xxxxxx <- where xxxxxx is user VoXaLot user name

Your eSeries should ring.
__________________
Martin

Please post support questions on the forum. Do not send PMs unless requested.

Last edited by martin; 02-07-2007 at 01:55 PM.
martin is offline   Reply With Quote