I suggest you use a corresponding set up as for the Voipcheap set-up that you have working.
My suggestion would be as follows using the Voxalot Advanced Mode for Provider setup :
Provider Name*: Actionvoip.xxxxxxx where x....x is a reference in case you have multiple setups with different outgoing Caller ID
From User: Actionvoip_UserID or verified outgoing number in international format (00+CountryCode+Phone Number)
From Domain: sip.actionvoip.com
Username*: Actionvoip_UserID
Codecs*: ulaw;alaw;g729;gsm; (etc, your preference)
Host*: sip.actionvoip.com
Port*: 5060
Active*: Yes
SIP Register*: No (Yes required if receiving calls on this Provider)
Optimize Audio Path*: No (See Voxalot note on the set-up page)
Make sure you have dial plan entries to route the call to this provider with the proper format this provider requires.
|