View Single Post
Unread 09-29-2009, 08:31 PM   #9
boatman
Senior Member
 
boatman's Avatar
 
Join Date: Jul 2007
Location: Oregon, USA
Posts: 365
Thanks: 17
Thanked 77 Times in 64 Posts
boatman is on a distinguished road
Default

Quote:
Originally Posted by Juste View Post
Would stun.xten.com be faulty all of a sudden?
Probably not. Even if the stun server is not working the ATA could still be contacted and would still ring the attached phone. The call could be answered, however the audio may be missing in one direction, the person speaking on the ATA with the faulty stun server might not be heard by the other person.

Sometimes its preferable to operate the ATA independently of a stun server. The benefit is that phone service can continue no matter if the stun server is working. To do that see steps 1 to 4 below.

1. Forward the SIP ports and the RTP port range from the router to the ATA.
2. Set "STUN Enable:" no
3. Set "NAT Keep Alive Enable:" no
4. The ATA must learn it's public IP address, either through normal SIP registration, or place your public IP address in the 'EXT IP:' field).

I understand that you have not configured port forwarding in the routers, and that's OK. My question now is; are any of those SPA3102 units able to receive a call within the first 60 seconds after SIP registration to the Voxalot proxy?
boatman is offline   Reply With Quote
The Following User Says Thank You to boatman For This Useful Post:
Juste (10-01-2009)