View Single Post
Unread 04-02-2010, 06:56 AM   #80
Junior Member
Join Date: Apr 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
godsharry is on a distinguished road

Good afternoon sir.
I am not being able to use SmartVoiP with voxalot.Earlier I was able to use smartvoip but after adding smartvoip and voxalot in dialplans, giving VOIP to VOIP calls to route through voxalot and international landline and mobile calls to smartvoip, I faced problem.For the first few hours I was able to utilise these dial plans.But after around 16 hours I called VOIP to VOIP,my voice was not audible on the other end.Then later on after around one hour status of my VOIP became unregistered and now I am completely unable to use voxalot.
The settings that I used are:
Provider name : SmartVoiP
Username : ........
Password : .......
Codecs : g729;g723;g726;ilbc;gsm;ulaw;alaw (I USED DEFAULT CODECS)
Host :
Port : 5060
Active : Yes
SIP Register : No
Optimize Audio Path : Yes (I also disable Symmetric NAT handling as adviced)

SmartVoiP Details :

Sip Proxy :
Port : 5060
Codecs : G.711 (64 kbps)
G.726 (32 kbps)
G.729 (8 kbps)
G.723 (5.3 & 6.3 kbps)
GSMFR (13.2 kbps)
Stunserver (option) :

Source : SmartVoiP

Address Source : SmartVoiP

SmartVoip is a service from
Betamax GmbH & Co KG
Im Mediapark 8
50670 Köln

Email: Please use the forms on our contact page
Tel: +49-221-3549565
Fax: +49-221-3549566

Managing director: Karin Nab
Commercial Register of the Local Court: Cologne
Registered under number: HRA 23157
VAT number: DE814570978

Thank you sir for this support forum which makes me quite positive for solution.
godsharry is offline   Reply With Quote