I would appreciate some help with sorting out my PSTN tab with SPA 3000 to remotely use my ATA for outgoing calls.
I was given some advice by evilbunny but it doesn't work properly. I did substitute my number for the echo test number and that worked but when I dial my landline number and I have my Voxalot number in place it doesn't pick up. Any help would be appreciated.
Here is what I changed in the PSTN tab to get going.
set ring through line 1 to no
PSTN-To-VoIP Gateway Enable: yes
PSTN CID For VoIP CID: yes
PSTN Caller Default DP: 2
Dial Plan 2: (S0<:my vox number>)
VoIP Answer Delay: 1800
PSTN Answer Delay: 1800
PSTN Ring Thru Delay: 0
you might need to set that last 1 to 1 if you get CID via PSTN