Quote:
Originally Posted by boatman
If you are using DNS SRV enter the test number with SIP port appended; *0@proxy01.sipphone.com:5060
After the test, can you confirm that your ATA shows 'Last Called Number:' to be '*0@proxy01.sipphone.com:5060'? If so, you did the test correctly.
|
So I continue to struggle. The last called number shows "2".
Because of the number of changes performed, I resetted the PAP2 and re-configured it based on the Wiki and using option 1 for the stun settings. I'm also using port 4060 (not the default 5060).
I have 2 ATAs that are experiencing the same problem with VoXalot. The 1st ATA is the main home line and that's currently registered with voip.ms until I can test and resolve the issues with the 2nd ATA and copy those settings to the main (1st) ATA. The 1st ATA is using the default 5060 port.
So, unless relevant, the scope of my problem will be on the 2nd ATA until I fix the problem. Here's where I'm currently at:
1. Last number called still shows "2"
2. Outgoing calls work perfectly fine
3. Incoming calls connect but the recipient (me) is hearing an echo similar to an echo test. The caller hears absolutely nothing but dead air.
I hope I've made things a little clearer and transparent about my issues.