Voxalot / SIP Broker Support Forums - View Single Post

boatman · 10-04-2008, 06:52 PM

The latest firmware for the BVA8051 is version ar18d, released back in 2005. You can find it on the Leadtek FTP site.

A factory reset is performed as follows:
1. Unplug the power
2. Lift the handset of the phone off hook
3. Use a pin to push into the reset hole, hold it there while you plug the power back in, and you will see power LED flashing rapidly. Keep holding it until the power, link, activity, and line LEDs flash several times in alternating pairs to indicate that factory defaults are being restored.

The BVA8051is actually the same as the SIPphone Call-In-One adapter. I think SIPphone's documentation may be better that Leadtek's. There are some applicable PDF documents HERE, Look for any PDF documents with names containing "8051" or "call-in-one".

The BVA8051 may not work with the updated FWD, but it can be used with Voxalot. Example setting for Voxalot are HERE. I have a DTA310 with firmware AR17I, I was unable to make voice mail notification work. The problem may or may not have been fixed in firmware AR18D. For some reason I am not able to run firmware AR18D on my DTA310 device.

10-04-2008, 06:52 PM	#6
boatman Senior Member Join Date: Jul 2007 Location: Oregon, USA Posts: 365 Thanks: 17 Thanked 77 Times in 64 Posts	The latest firmware for the BVA8051 is version ar18d, released back in 2005. You can find it on the Leadtek FTP site. A factory reset is performed as follows: 1. Unplug the power 2. Lift the handset of the phone off hook 3. Use a pin to push into the reset hole, hold it there while you plug the power back in, and you will see power LED flashing rapidly. Keep holding it until the power, link, activity, and line LEDs flash several times in alternating pairs to indicate that factory defaults are being restored. The BVA8051is actually the same as the SIPphone Call-In-One adapter. I think SIPphone's documentation may be better that Leadtek's. There are some applicable PDF documents HERE, Look for any PDF documents with names containing "8051" or "call-in-one". The BVA8051 may not work with the updated FWD, but it can be used with Voxalot. Example setting for Voxalot are HERE. I have a DTA310 with firmware AR17I, I was unable to make voice mail notification work. The problem may or may not have been fixed in firmware AR18D. For some reason I am not able to run firmware AR18D on my DTA310 device. Last edited by boatman; 10-04-2008 at 09:22 PM.