Here are the results of using *500 in the Mailbox Field when a message has been left.
Voxalot sends the following:
Code:
Received from udp:202.60.75.46:5060 at 28/6/2007 00:38:18:580 (818 bytes):
NOTIFY sip:zzzzzz@xxx.xxx.xxx.xxx:5062;line=rn0axdli SIP/2.0
Record-Route: <sip:202.60.75.46;lr=on>
Max-Forwards: 9
Record-Route: <sip:64.34.163.35;lr=on>
Via: SIP/2.0/UDP 202.60.75.46;branch=z9hG4bK206d.d1a45216.0
Via: SIP/2.0/UDP 64.34.163.35;branch=z9hG4bK206d.e56b5174.0
Via: SIP/2.0/UDP 64.34.163.35:46930;branch=z9hG4bK.27203dbe;rport=46930;alias
Via: SIP/2.0/UDP 64.34.163.35:5060
From: <sip:vmserver@voxalot.com>
To: <sip:zzzzzz@voxalot.com>
Contact: <sip:zzzzzz@64.34.163.35>
Call-ID: 4d61cf9e505d40e905032a18329d61ec@64.34.163.35
CSeq: 1 NOTIFY
User-Agent: VoiceMail
Event: message-summary
Content-Type: application/simple-message-summary
Content-Length: 82
P-hint: usrloc applied
P-hint: usrloc applied
Messages-Waiting: yes
Message-Account: sip:zzzzzz@voxalot.com
Voice-Message: 1/0
In response, the SNOM sends:
Code:
Sent to udp:202.60.75.46:5060 at 28/6/2007 00:38:18:590 (490 bytes):
SIP/2.0 200 Ok
Via: SIP/2.0/UDP 202.60.75.46;branch=z9hG4bK206d.d1a45216.0
Via: SIP/2.0/UDP 64.34.163.35;branch=z9hG4bK206d.e56b5174.0
Via: SIP/2.0/UDP 64.34.163.35:46930;branch=z9hG4bK.27203dbe;rport=46930;alias
Via: SIP/2.0/UDP 64.34.163.35:5060
Record-Route: <sip:202.60.75.46;lr=on>
Record-Route: <sip:64.34.163.35;lr=on>
From: <sip:vmserver@voxalot.com>
To: <sip:zzzzzz@voxalot.com>
Call-ID: 4d61cf9e505d40e905032a18329d61ec@64.34.163.35
CSeq: 1 NOTIFY
Content-Length: 0
When you press the Retrieve mail button, the VM prompts you to leave a message!
Is it possible to have the
Message-Account: field set to *500 instead of the Account number?