Here is the display for my webage sip6328.cfg file:
[SIP6328]
Proxy_Server_ID=us.voxalot.com
Proxy_Server_Domain=voxalot.com
SYSLOG_SERVER_IP=0.0.0.0
NTP_Server_IDs=time-a.nist.gov,time-b.nist.gov,0.0.0.0
NTP_Retry_Time=14400
NTP_Local_Time_Offset=-5.00
VoIP_Digit_Map_String="(X.T|X.#|*X.T)"
Preferred_Codecs=G711(PCMU),G711(PCMA),G729A,G723, G726-32,
Packetization_Time=20
RTP_Port=16384
TOS_Value=160
Enable_Silence_Suppression=1
Firewall_Bullet_Interval=70
Note that some of these setting (e.g. the time servers) can only be changed through the telnet interface.
Here is the result of the "Cs" command for my innomedia MTA6328-2Re
Current SIP Proxy Servers = us.voxalot.com
Use Outbound Proxy = Yes
Current Local SIP Port = 5060
Response Code for Retry Registration =
Retry Registration Interval = 7 seconds
Current SIP Domain = voxalot.com
Current Exponential Backoff = 500 ms
Current Exponential Cap = 32000 ms
Current Non-INVITE retry = 7 times
Current INVITE msg retry = 7 times
Current REGISTER expiration = 600 seconds
Current Session Timer = 0 seconds
Current Bullet Interval = 70 seconds
Current Number of Codecs = 5
Current Codec List = G711(PCMU) G711(PCMA) G729A G723 G726-32
Digitmap Partial Match Timeout = 4
Digitmap Critical Timeout = 2
Cancel Call Waiting Invoke String = *70
Call Transfer Invoke String = *90
CID Block Invoke String = *67
CID Display Invoke String = *82
Call Park Invoke String = *98
Call Retrieve Invoke String = *99
Do not Disturb Enable Invoke String = *74#
Do not Disturb Disable Invoke String = #74#
Use User-Agent Header = Yes
Set Jitter Buffer Adaptive = Yes
Use SIP INFO for DTMF = No
Re-registration Credential Enable = No
Current SIP PING Interval = 0 seconds
Current SIP PING Proxy Require Header =
Current SIP External IP address =
Digitmap Early Quit = Enabled
Digitmap Early Quit FW Number =
G729A Codec_Variant = 1 (G729A)
The last entry (G729A) was important to get touch-tone menuing to work properly for me.
|