Quote:
Originally Posted by emoci
Try these 2/3 things:
3. The Problem with Speed Dial is that you gotta dial **xxx, PBXes considers * as if you want to start dialing fresh ( so set up a dial plan line like this eg. 88|**+X.) so when dialing speed dial, if you use that example, instead of **300 you would dial 88300
(you don't have to use 88, or even two digits, but pick something to put before the vertical line that will tell the system to replace it with **, so this 9|**+X. would work too, so for **300 you would dial 9300)
|
The speed dial works fine, but only problem can not dial out any other number 1-xxx-xxx-xxxx, all should be via Speed dial format. any suggestion in dial plan to take care of straight dialing.