Using Billion 7402VGO in sip DID mode, where neither of two FXS ports directly registered to VoXalot or any VSp.
On VoXalot a number of providers are registered with call forward to
xxxxxx@mydomain.dyndns.org. This includes two sipgate accounts, voipcheap and potentiall BT broadband Talk.
Inbound physical and virtual phone numbers are redirected to
44xxxxxx@sipbroker.com which, in turn routes to the sip DID
xxxxxx@mydomain.dyndns.org
Some success with the Billion in establishing a local dial plan allowing me to choose a provider, and the sipgate dial plans also work. Curiously sipgate registration onto voxalot seems to enable the Billion gateway without any of its ports being registered to it.
However use of Voxalot seems to be restricted to sipcode dialling only. Mind you, I can successfully dial my own telephone number via sip code through Voxalot from voip port 1 to voip port 2.
Voxalot speed dials when prefixed #0 seem to attempt to call, but fail. Is this because no Billion port is registered to Voxalot, or can it be made to work via sip codes?
The current Billion dial plan for UK dialling is as follows:
((<#0:>*x.T<:@vl>|<#0:>**x.T<:@vl>|<#1:>x.T<:@bt>| <#2:>x.T<:@sg>|<#3:>x.T<:@vc>|0[578]0x.T<:@pstn>|09x.T<:@pstn>|<#1:00441737>[2-9]xxxxxT<:@bt>|<#10:0044>[12578]x.T<:@bt>|<#2:00441737>[2-9]xxxxxT<:@sg>|<#20:0044>[12578]x.T<:@sg>|<#3:00441737>[2-9]xxxxxT<:@vc>|<#30:0044>[12578]x.T<:@vc>|<#300:00>x.T<:@vc>)
where
bt = bt broadband talk
sg = sipgate
vc = voipCheap
vl = voxalot
Any comments on this dial plan on how to improve the voxalot functionality in SIP DID mode would be gratefully received.
Many thanks and seasonal greetings!!
BJ