Hi Emoci
Here is my dialplan on my ATA.
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
So the first reference to *xx is allowing the SPA to dial * followed by 2 numbers, but the *xx envokes the ATA's build in service activation code, not a call to SIPbroker whenever there is a conflict.
I've even trying changing it to *xxx and when I dial *747 (for sipphone) or *393 (for FWD), I immediately get a fast busy.
Richard
Quote:
Originally Posted by emoci
Any chance you can post your current dialplan on the SPA1001, that way it'll be easier to make suggestions on what may help (but it is just a matter of playing with the dial plan)
|