Help with PSTN registration.
:confused::confused:
I would appreciate some help with sorting out my PSTN tab with SPA 3000 to remotely use my ATA for outgoing calls. I was given some advice by evilbunny but it doesn't work properly. I did substitute my number for the echo test number and that worked but when I dial my landline number and I have my Voxalot number in place it doesn't pick up. Any help would be appreciated. Here is what I changed in the PSTN tab to get going. set ring through line 1 to no PSTN-To-VoIP Gateway Enable: yes PSTN CID For VoIP CID: yes PSTN Caller Default DP: 2 Dial Plan 2: (S0<:my vox number>) VoIP Answer Delay: 1800 PSTN Answer Delay: 1800 PSTN Ring Thru Delay: 0 you might need to set that last 1 to 1 if you get CID via PSTN |
All times are GMT. The time now is 10:45 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.