Official Voxalot STUN Server
Hello,
Please note that the official Voxalot STUN server is: stun.voxalot.com:3478 It seems that there a quite a few people still trying to use an older STUN server stun.voxalot.com.au - which is no longer available. If you are using a STUN server, please make sure it is set to: stun.voxalot.com:3478 |
im using spa3102 i plan to change my stun to this but it should be exactly as stun.voxalot.com:3478 with the port? or just the stun.voxalot.com is enough?
|
Quote:
SIP Broker Wiki : Inbound Calls Directly to your LinkSys or Sipura |
Quote:
Thankyou hkp |
Quote:
If you don't want to use STUN you can forward the SIP and RTP ports instead. That preserves the port numbers through NAT traversal. As for the external IP address, your ATA can get that during the registration process. People who have not configured their ATAs to send the correct connection information can still use Voxalot but must use Voxalot's 'symmetric NAT handling' option. These are the same people who report problems when 'symmetric NAT handling' fails, as happened a couple times earlier this year (on one proxy only). |
If your ATA has its own external IP address (not an internal LAN address such as 192.168.x.x), you shouldn't need to use a STUN server.
|
Can not register
Cannot register my v100 to voxalot was working for years registers when I change to MNF but no success on the ATA with Voxalot ( is registering on x-lite softphone ? Any problems at voxalot ? any solution
Ta Jak |
All times are GMT. The time now is 07:31 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.